Oliver / Fiat 1365 (4 WD)
Built: 1971–1975 · Series: 65 er-Baureihe
More machines from model year 1971
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Oliver / Fiat 65 series – tractors built in Italy for Oliver's European network: 1365 and 1465, 44.9 to 56.6 kW, four-cylinder engines of 3,456 to 4,562 cm³
Like the smaller 55 series, Oliver also had the 65 series built for the European market during the 1960s by Fiat in Italy; here too the type designation names approximately the power class in hp. It comprises the 1365 and 1465 models, the former with four-wheel drive. Here too sales ran through Oliver's European dealer network, with close technical kinship to contemporary Fiat ranges.
Read on 3 more paragraphs
The register lists here 2 versions with 44.9 to 56.6 kW from four-cylinder engines of 3,456 to 4,562 cm³, an unladen weight of 2,250 to 2,948 kg, a length of 3,099 to 3,556 mm, a width of 1,778 to 1,831 mm, a height of 1,539 to 1,748 mm, torque of 199 to 279 Nm and a rated speed of 2,100 to 2,400 rpm.
The more powerful 65 series positioned itself above the 55 series for larger arable farms and shared its engine base and chassis concept with contemporary Fiat tractors of the same power class. As the more powerful version, the 65 series competed directly with other mid-to-large standard tractors of the 1960s in Western Europe.
Buyers of used units should check the clutch, gearbox and, on the four-wheel-drive version, the front axle, as well as the hydraulics, brakes and rust on the bodywork; because production has ended, spares run mostly through Fiat parts stocks and specialist vintage-tractor dealers. An inspection should also check the alternator, starter motor and the seals on the engine and gearbox.
Sources: SpecCodex register, model data: Oliver / Fiat 65er-Baureihe
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 61 hp (44.9 kW)correct |
| Rated speed | 2,400 rpmcorrect |
| Torque | 199 Nmcorrect |
| Speed at max. torque | 1,200 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,456 cm³correct |
| Bore | 100 mmcorrect |
| Stroke | 110 mmcorrect |
| Compression ratio | 17correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,099 mmcorrect |
|---|---|
| Width | 1,778 mmcorrect |
| Height | 1,539 mmcorrect |
| Wheelbase | 2,070 mmcorrect |
| Ground clearance | 478 mmcorrect |
| Unladen weight | 2,250 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 8 V/2 R or 12 V/3 Rcorrect |
| Front tyres | 6.00-16 (4WD: 9.5-24)correct |
| Rear tyres | 16.9-30correct |
| Top speed | 25 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 20 kW/t (45 kW / 2.2 t)
Power class: Universal (40–100 hp)
Stronger than 42% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Oliver / Fiat 1365 (4 WD) have?
The Oliver / Fiat 1365 (4 WD) delivers 61 hp.
How much does the Oliver / Fiat 1365 (4 WD) weigh?
The unladen weight is 2,250 kg.
What engine does the Oliver / Fiat 1365 (4 WD) have?
4 cylinders, 3,456 cm³ displacement, Diesel.
How fast does the Oliver / Fiat 1365 (4 WD) go?
Top speed is 25 km/h.
What are the dimensions of the Oliver / Fiat 1365 (4 WD)?
3,099 mm × 1,778 mm × 1,539 mm.
When was the Oliver / Fiat 1365 (4 WD) built?
Production years: 1971–1975.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
