Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Nissan › CABSTAR › Cabstar 45.15

Nissan Cabstar 45.15

Built: 2008-2009 · Series: CABSTAR

More machines from model year 2008

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Nissan Cabstar 45.15 is a model in the CABSTAR series. Production: 2008-2009. The engine delivers 110 kW, has 4 cylinders, with a displacement of 2,953 cm³. The vehicle is 6,350 mm long and 2,200 mm wide. The unladen weight is 2,660 kg. The gross vehicle weight is 4,500 kg. The gearbox offers 6 gears. The CABSTAR series covers 8 models. Rated output within it ranges from 96 to 110 kW; the Cabstar 45.15 sits at the top of that range with 110 kW. Its immediate neighbours are the Cabstar 45.13 below it with 96 kW. Unladen weight within it ranges from 2,430 to 3,310 kg; here the Cabstar 45.15 sits in the lower part of that range with 2,660 kg. 1264 Nissan models across 47 series are on record.

Nissan Cabstar – the light chassis-cab truck with Renault Maxity engineering from Ávila: type logic from gross weight and power, 96 to 110 kW, four-cylinder diesels, 3.5 to 4.5 tonnes gross weight

The Nissan Cabstar is the brand's light chassis-cab truck, developed jointly with the identical Renault Maxity since 2006 and, like the larger Atleon, built in Ávila, Spain. The type designation follows the same pattern as the Atleon: the digits before the point give the gross vehicle weight in tenths of a tonne, the digits after the engine power in horsepower divided by ten – Cabstar 35.13 is thus 3.5 tonnes at roughly 130 hp, Cabstar 45.15 about 4.5 tonnes at roughly 150 hp. The F24 suffix marks the chassis series, SFTF24 a wheelbase variant. Earlier Cabstar generations go back to the 1980s, as an independent Nissan design before the cooperation with Renault.

Read on 3 more paragraphs

The register lists here 8 versions with 96 to 110 kW from four-cylinder diesels of 2,488 to 2,953 cm³, unladen weights from 2,430 to 3,310 kg, gross weights from 3,510 to 4,500 kg, lengths from 5,560 to 6,750 mm and widths from 2,020 to 2,210 mm.

The Cabstar serves the class of light distribution trucks between 3.5 and 4.5 tonnes, where it competes with the Iveco Daily chassis and entry-level Mitsubishi Fuso Canter; bodybuilders fit it with box bodies, refrigerated units and flatbeds for urban delivery.

On used examples, rust on the frame and cab floor, the condition of clutch and gearbox in stop-and-go distribution service, the common-rail injection and the brakes count; parts run through the Nissan commercial-vehicle network and partly through Renault.

Sources: SpecCodex register, model data: Nissan Cabstar, Nissan (manufacturer)

Technical data

Engine

Power110 kWcorrect
Cylinders4correct
Displacement2,953 cm³correct

Dimensions and weights

Length6,350 mmcorrect
Width2,200 mmcorrect
Unladen weight2,660 kgcorrect
Gross vehicle weight4,500 kgcorrect

Drivetrain and chassis

Gears6correct

Where this model stands

Power-to-weight ratio: 41.4 kW/t (110 kW / 2.7 t)

Stronger than 8% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Nissan Cabstar 45.15 have?

The Nissan Cabstar 45.15 delivers 110 kW.

How much does the Nissan Cabstar 45.15 weigh?

The unladen weight is 2,660 kg.

What is the gross vehicle weight of the Nissan Cabstar 45.15?

4,500 kg.

What engine does the Nissan Cabstar 45.15 have?

4 cylinders, 2,953 cm³ displacement.

What are the dimensions of the Nissan Cabstar 45.15?

6,350 mm × 2,200 mm.

When was the Nissan Cabstar 45.15 built?

Production years: 2008-2009.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare