New Holland TM175 2WD – specifications
Series: Other models
Build year not documented · Data origin: Reference work (Wikipedia/Wikibooks), Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The New Holland TM175 is a tractor in the tractor category, configured with two-wheel drive. This model represents a specific configuration within the series and is designed for applications requiring high traction combined with good stability. The design focuses on transferring available engine power to the ground, with the two-wheel-drive version imposing specific requirements on weight distribution and implement attachment.
The machine is powered by a six-cylinder engine with a displacement of 7,472.5 cm³, delivering 177 hp at a rated speed of 2,200 rpm. The maximum torque of 694 Nm is available at 1,400 rpm, ensuring high pulling power at low speeds and optimizing fuel consumption during field operations. With an empty weight of 7,165 kg and ground clearance of 470.2 mm, the tractor provides a solid base for heavy implements. The lifting capacity of 7,750 kg allows for the use of large rear-mounted implements, while the fuel tank capacity of 397.8 l permits long working intervals without interruptions. The powershift transmission with 17 forward gears and 6 reverse gears allows for fine adjustment of speed to the specific soil cultivation task.
Within the series, the TM175 is positioned by its specific power and weight class. The combination of 177 hp output and an empty weight of 7,165 kg defines the application range for medium to heavy field work. The available PTO power of 145 hp at speeds of 540E/1,000 rpm meets the requirements of common implements. The hydraulic performance with a pump flow rate of 120 l/min supports the control of implements with high oil demand. These parameters determine suitability for specific agricultural tasks where traction and lifting power are the primary considerations.
New Holland – other models: the collective page of tractors outside the named ranges, from the Fiat heritage (80-66, 110-90) through the Ford 40 and 70 series (7740, 8340, 8670) to the 9x82 and T9, 14 to 457 kW, NEF
This page gathers the New Holland tractors the register could not assign to a named range – and it shows the brand's three roots: Fiat of Turin, Ford of Basildon and Versatile of Winnipeg. New Holland, founded in 1895 as a farm-machinery works in Pennsylvania, was joined with Ford Tractor in 1986 into Ford New Holland and bought by Fiat in 1991, which merged with Case as CNH from 1999; the blue tractors of the 1990s therefore carry three type logics. The Fiat types such as 80-66 and 110-90 give the hp class before and the series after the hyphen; the Ford 40 (5640 to 8340) and 70 (8670 to 8970) series from Basildon and Antwerp give the power in the middle digits and the series in the last, with SLE and SL as equipment lines; the articulated 9282 to 9882 and the later T9 come from Winnipeg and Fargo. From 2007 the T logic applies: T4 to T9 as ranges, the following digits as power (T6.140 about 140 hp). The engines are Fiat's 8000 series, Ford's Genesis, FPT's NEF and Cursor and Cummins in the articulated tractors.
Read on 3 more paragraphs
The register lists here 578 versions with 13.8 to 457 kW from three- to six-cylinders of 954 to 15,001 cm³, PTO outputs from 15 to 530 hp, lift capacities from 574 to 8,900 kg, unladen weights from 652 to 25,401 kg, gross weights from 3,000 to 18,000 kg, lengths from 2,700 to 8,005 mm and widths from 1,082 to 4,060 mm.
New Holland is Europe's second-largest tractor brand after John Deere and in the top three in Italy, Spain, France, Britain and Turkey; the brand also carries the specialist tractors from Jesi and the Boomer compact class from Japan.
On used tractors, clutch and shuttle count on Fiat types, electronics and powershift on the Ford 40 and 70 series, transmission and tyres on the articulated tractors, and on the T ranges operating hours, common-rail injection and exhaust aftertreatment; parts run through CNH.
Sources: SpecCodex register, model data: New Holland (weitere Modelle), New Holland Agriculture (manufacturer)
Technical data
Engine
| Power | 177 hp (130.2 kW)correct |
|---|---|
| Rated speed | 2,200 rpmcorrect |
| Torque | 694 Nmcorrect |
| Speed at max. torque | 1,400 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 7,472.5 cm³correct |
| Aspiration | Turbocharged, air-to-air intercooledcorrect |
| Coolant capacity | 26.1 lcorrect |
| Engine oil capacity | 19.3 lcorrect |
Dimensions and weights
| Length | 5,935 mmcorrect |
|---|---|
| Width | 2,495 mmcorrect |
| Height | 3,050 mmcorrect |
| Wheelbase | 2,843.8 mmcorrect |
| Ground clearance | 470.2 mmcorrect |
| Unladen weight | 7,165 kgcorrect |
Drivetrain and chassis
| Gearbox | 18 V/6 R or 19 V/6 Rcorrect |
|---|---|
| Gearbox type | Power Command powershift transmissioncorrect |
| Forward gears | 17correct |
| Reverse gears | 6correct |
Working data
| Lifting capacity | 7,750 kgcorrect |
|---|---|
| Pump flow | 120 l/mincorrect |
| Hydraulic oil capacity | 100.3 lcorrect |
| Fuel tank capacity | 397.8 lcorrect |
Other data
| Linkage category | Cat II/IIIcorrect |
|---|---|
| PTO output | 145 hpcorrect |
| PTO speed | 540E/1000 rpmcorrect |
| System voltage | 12 Vcorrect |
Where this model stands
Power-to-weight ratio: 18.2 kW/t (130 kW / 7.2 t)
Power class: Large (100–180 hp)
Stronger than 89% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the New Holland TM175 have?
The New Holland TM175 delivers 177 hp.
How much does the New Holland TM175 weigh?
The unladen weight is 7,165 kg.
What engine does the New Holland TM175 have?
6 cylinders, 7,472 cm³ displacement.
What is the PTO output of the New Holland TM175?
PTO output is 145 hp. PTO speeds: 540E/1000 rpm.
How much does the rear linkage of the New Holland TM175 lift?
The rear linkage lifts 7,750 kg.
What are the dimensions of the New Holland TM175?
5,935 mm × 2,495 mm × 3,050 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 28 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.