Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › New Holland › TD5 › TD5.95

New Holland TD5.95

Built: Year not documented · Series: TD5

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the TD5.95, New Holland offers a model from the TD5 series. The engine delivers 99 hp (73 kW), has 4 cylinders, with a displacement of 3,400 cm³. Rated speed is 2,300 rpm. The machine is 4,320 mm long, 1,920 mm wide and 2,665 mm high. The unladen weight is 3,740 kg. The wheelbase measures 2,280 mm. Ground clearance is 464 mm. The tank holds 121 litres. The engine is water-cooled. The gross vehicle weight is 6,000 kg. The fuel is diesel. Rated output across the New Holland range ranges from 12.1 to 621.5 hp; the TD5.95 sits at the bottom of that range with 99 hp. Its immediate neighbours are the B95C TC below it with 98.3 hp and the LB90 above it with 99.4 hp. Rated output across the New Holland range ranges from 59 to 535 hp; here the TD5.95 sits at the bottom of that range with 99 hp. 1448 New Holland models across 71 series are on record.

New Holland TD5.95: four-cylinder tractor of the TD5 range with 73 kW output, 6,000 kg gross vehicle weight and a 2,280 mm wheelbase

New Holland places the TD5 range, like the TD4 range, in the mid segment of general-purpose tractors, between compact yard tractors and the large T-range field tractors.

Read on 3 more paragraphs

The TD5.95 is powered by a water-cooled four-cylinder diesel engine of 3.4 litres, delivering 73 kW at 2,300 rpm, roughly 99 hp. Unladen weight is 3,740 kg against a gross vehicle weight of 6,000 kg, with a length of 4,320 mm, a height of 2,665 mm and a width of 1,920 mm; the machine therefore carries considerably more payload than its unladen weight suggests, while staying compact enough for normal-width tracks.

General-purpose tractors of this size cover tillage, transport and power-take-off work at the standard speeds of 540 or 1,000 rpm on medium holdings. The gap between gross vehicle weight and unladen weight sets how much front hydraulic implement or front ballast is possible without overloading the front axle; the combination of 73 kW and a 6,000 kg gross vehicle weight makes the TD5.95 versatile, from pure drawbar work to towing a trailer.

When buying used, check the brakes, which see more load at a gross vehicle weight of 6,000 kg than on lighter models, along with the tightness of hydraulic cylinders and the condition of the driveline guards. Rust on load-bearing panels points to long periods stored outdoors, as does uneven tyre wear from one-sided loading.

Sources: SpecCodex-Register: Kennwerte des Modells New Holland TD5.95, New Holland (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power99 hp (73 kW)correct
Rated speed2,300 rpmcorrect
Cylinders4correct
Displacement3,400 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,320 mmcorrect
Width1,920 mmcorrect
Height2,665 mmcorrect
Wheelbase2,280 mmcorrect
Ground clearance464 mmcorrect
Unladen weight3,740 kgcorrect
Gross vehicle weight6,000 kgcorrect

Working data

Fuel tank capacity121 lcorrect

Where this model stands

Power-to-weight ratio: 19.5 kW/t (73 kW / 3.7 t)

Power class: Universal (40–100 hp)

Stronger than 65% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the New Holland TD5.95 have?

The New Holland TD5.95 delivers 99 hp.

How much does the New Holland TD5.95 weigh?

The unladen weight is 3,740 kg.

What is the gross vehicle weight of the New Holland TD5.95?

6,000 kg.

What engine does the New Holland TD5.95 have?

4 cylinders, 3,400 cm³ displacement, Diesel.

What are the dimensions of the New Holland TD5.95?

4,320 mm × 1,920 mm × 2,665 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare