Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › New Holland › T5 › T5.105

New Holland T5.105

Built: Year not documented · Series: T5

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the T5.105, New Holland offers a model from the T5 series. The engine delivers 107 hp (79 kW), has 4 cylinders, with a displacement of 3,400 cm³. Rated speed is 2,300 rpm. The machine is 4,036 mm long, 2,500 mm wide and 2,569 mm high. The unladen weight is 3,700 kg. The wheelbase measures 4,000 mm. Ground clearance is 450 mm. Lifting capacity is 4,400 kg. The tank holds 160 litres. The engine is water-cooled. The gross vehicle weight is 6,250 kg. The fuel is diesel. Rated output across the New Holland range ranges from 12.1 to 621.5 hp; the T5.105 sits in the lower part of that range with 107 hp. Its immediate neighbours are the T5060 below it with 106.5 hp and the LB110 above it with 109.5 hp. Unladen weight across the New Holland range ranges from 652.3 to 37,260 kg; here the T5.105 sits at the bottom of that range with 3,700 kg. 1448 New Holland models across 71 series are on record.

New Holland T5 – mid all-purpose class: model 120 and T5.105, four-cylinder of 3,400 cm³, 79 to 86 kW (107 to 117 hp), lift capacity 4,400 kg, gross weight 6,250 kg

The T5 range sits at New Holland between the compact T4 and the large T6/T7 class and follows the same naming scheme, in which the number after the dot gives the approximate power class, here T5.105 for about 105 hp. The plain designation 120 points to an earlier or different label within the same range.

Read on 4 more paragraphs

The register lists 2 versions with 79 to 86 kW (107 to 117 hp) from four-cylinder engines of 3,400 cm³, an unladen weight of 3,700 kg and a gross weight of 6,250 kg; lift capacity is 4,400 kg, length is 4,036 mm, width is 2,500 mm and the build height is a minimum of 2,569 mm, at a rated speed of 2,300 rpm.

As a mid all-purpose tractor the T5 meets the needs of mixed arable and livestock farms across Europe that need more power and lift capacity than the T4 class but not yet the size of the T6 and T7 ranges, for example for tillage, baler work, slurry transport and heavier front-loader duty in the daily routine of larger farms.

When buying used, check operating hours and the condition of clutch and gearbox, the tightness of hydraulics and lift, the condition of the cab suspension, PTO operation, and rust on the bodywork and frame; parts run through New Holland's wide dealer network.

New Holland belongs to the CNH Industrial group, which also includes the sister brand Case IH, reflected in the wide availability of parts even for older T5 models.

Sources: SpecCodex register, model data: New Holland T5, New Holland

Technical data

Engine

Fueldieselcorrect
Power107 hp (79 kW)correct
Rated speed2,300 rpmcorrect
Cylinders4correct
Displacement3,400 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,036 mmcorrect
Width2,500 mmcorrect
Height2,569 mm (minimum)correct
Wheelbase4,000 mmcorrect
Ground clearance450 mmcorrect
Unladen weight3,700 kgcorrect
Gross vehicle weight6,250 kgcorrect

Working data

Lifting capacity4,400 kgcorrect
Fuel tank capacity160 lcorrect

Where this model stands

Power-to-weight ratio: 21.4 kW/t (79 kW / 3.7 t)

Power class: Large (100–180 hp)

Stronger than 70% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the New Holland T5.105 have?

The New Holland T5.105 delivers 107 hp.

How much does the New Holland T5.105 weigh?

The unladen weight is 3,700 kg.

What is the gross vehicle weight of the New Holland T5.105?

6,250 kg.

What engine does the New Holland T5.105 have?

4 cylinders, 3,400 cm³ displacement, Diesel.

How much does the rear linkage of the New Holland T5.105 lift?

The rear linkage lifts 4,400 kg.

What are the dimensions of the New Holland T5.105?

4,036 mm × 2,500 mm × 2,569 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
2 current listings for New Holland T5.105 on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Traficom — Finnish vehicle register (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare