StartTelehandlersNew Holland › M428

New Holland M428

Series: New Holland Telescopic Forklift

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The New Holland Telescopic Forklift series from New Holland includes the M428. The engine delivers 121.7 hp (79 kW), with a displacement of 4,506.4 cm³. Torque is 514.9 Nm. The unladen weight is 10,939.7 kg. The wheelbase measures 3,121.2 mm. The tank holds 135.1 litres. The gearbox has 4 forward gears. There are also 3 reverse gears. The pump delivers 115.1 l/min. The hydraulic tank holds 181.7 litres. Working pressure is 250 bar. The electrical system runs on 12 V. Tyre size: 13,00-24 TG 12pr. The New Holland Telescopic Forklift series covers 19 models. Rated output within it ranges from 76 to 121.7 hp; the M428 sits at the top of that range with 121.7 hp. Its immediate neighbours are the LM435A below it with 111.5 hp. 502 New Holland models across 32 series are on record. The model is listed under Telehandlers. 16 verified figures from 1 source are on file.

Technical data

Engine

Power121.7 hp (79 kW)correct
Torque514.9correct
Displacement4,506.4 cm³correct
AspirationTurbochagedcorrect

Dimensions and weights

Wheelbase3,121.2correct
Unladen weight10,939.7 kgcorrect

Drivetrain and chassis

Gearbox typepowershift transmissioncorrect
Forward gears4correct
Reverse gears3correct
Tyre size13.00-24 TG 12prcorrect
System voltage12 Vcorrect

Working data

Pump flow115.1 l/mincorrect
Hydraulic oil capacity181.7 lcorrect
Hydraulic pressure250correct
Fuel tank capacity135.1 lcorrect

Where this model stands

Power-to-weight ratio: 7.2 kW/t (79 kW / 10.9 t)

Stronger than 58% of the telehandlers in the register — out of 658 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the New Holland M428 have?

The New Holland M428 delivers 122 hp.

How much does the New Holland M428 weigh?

The unladen weight is 10,940 kg.

What engine does the New Holland M428 have?

4,506 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Telehandler in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare