New Holland Geotech 9482
Built: 1995–1999 · Series: 82 er-Baureihe
More machines from model year 1995
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
New Holland Geotech 82 series – large tractors 9282 to 9882: six-cylinders with 8.3 to 14-litre displacement, 191 to 313 kW and up to 14,528 kg unladen weight
The Geotech 82 series forms the top power class of New Holland's large tractors, covering the 9282, 9482, 9682 and 9882 types; the register name, like the smaller 60 and 70 series, dates from New Holland's merger era in the 1990s. All four models carry six-cylinder diesel engines whose displacement rises with the power step.
Read on 3 more paragraphs
The register lists 4 versions with 191.2 to 312.6 kW from six-cylinders with 8,268 to 14,039 cm³ displacement. Unladen weights range from 11,327 to 14,528 kg at a uniform length of 6,756 mm, uniform width of 3,820 mm and uniform height of 3,477 mm; torque lies between 1,011 and 1,802 Nm at rated speeds of 2,100 to 2,200 rpm.
With outputs above 300 kW, the Geotech 82 series counts among the largest field tractors of its time, designed for large farms with very high draft-power needs, such as tillage with wide cultivators on large field areas, competing with comparable large tractors from Case IH and John Deere. It is used mainly for tillage, sowing, transport work and powering trailed harvesting machinery.
When buying used, the operating hours on the six-cylinder, the condition of the lift hydraulics, the tightness of turbocharger and cooling system, and wear on the axles and wide tyres all matter. Spare parts run through the New Holland dealer network. It is also worth checking the on-board electronics, cab mounting and seat suspension, and tyre tread depth.
Sources: SpecCodex register, model data: New Holland Geotech 82er-Baureihe, New Holland Agriculture (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 310 hp (228 kW)correct |
| Rated speed | 2,100 rpmcorrect |
| Torque | 1,222 Nmcorrect |
| Speed at max. torque | 1,587 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 10,824 cm³correct |
| Bore | 125 mmcorrect |
| Stroke | 147 mmcorrect |
| Compression ratio | 16correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 6,756 mmcorrect |
|---|---|
| Width | 3,820 mmcorrect |
| Height | 3,477 mmcorrect |
| Wheelbase | 3,380 mmcorrect |
| Unladen weight | 13,683 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 12 V/4 R or 12 V/2 Rcorrect |
| Front tyres | 20.8 R 42 AScorrect |
| Rear tyres | 20.8 R 42 AScorrect |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | articulated framecorrect |
|---|
Where this model stands
Power-to-weight ratio: 16.7 kW/t (228 kW / 13.7 t)
Power class: Heavy (> 180 hp)
Stronger than 97% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the New Holland Geotech 9482 have?
The New Holland Geotech 9482 delivers 310 hp.
How much does the New Holland Geotech 9482 weigh?
The unladen weight is 13,683 kg.
What engine does the New Holland Geotech 9482 have?
6 cylinders, 10,824 cm³ displacement, Diesel.
How fast does the New Holland Geotech 9482 go?
Top speed is 30 km/h.
What are the dimensions of the New Holland Geotech 9482?
6,756 mm × 3,820 mm × 3,477 mm.
When was the New Holland Geotech 9482 built?
Production years: 1995–1999.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.