New Holland E215LCME
Series: New Holland Hydraulic Excavator
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
New Holland E-Series: from B-generation to C-generation crawler excavators
New Holland Construction builds its crawler excavators with Japan's Kobelco, which is why the line is often labeled New Holland Kobelco. The "New Holland Hydraulic Excavator" bucket here groups 35 live-listed E-Series models, from the compact E130 up to the large E485.
Read on 3 more paragraphs
The number after the E corresponds roughly to size class and operating weight: across all 35 models, operating weight ranges from 12,800 to 79,000 kg, with engine output from 60 to 344 kW. The letter after it marks the generation – the B-Series was followed by the C-Series, which the manufacturer states delivers roughly 5% more power. Suffixes like SR (Short Reach, a shorter tail swing for confined sites) mark further variants.
Tier 4 Final emissions standards marked a turning point: newer models meet it via cooled exhaust gas recirculation and a diesel oxidation catalyst, without a particulate filter. Displacement (3,900 to 15,600 cm³) and cylinder count (4 to 6) are recorded for over 30 models, torque (390 to 998 Nm) for 16.
Buying used, pay attention to boom and dipper bushings, undercarriage track condition, and the tightness of the main and swing pumps. Models such as E130, E175, E215 and E385 appear regularly in the listed inventory – but the trailing number alone says nothing about build year; that's what the serial plate is for.
Sources: Kennwerte der Modelle New Holland Hydraulic Excavator, – Ohne Dieselpartikelfilter: Abgasnorm Tier 4 Final bei Raupenbaggern erreicht, – Kettenbagger Kurzheck Kobelco, New Holland E200 SR (Beispielangebot, SR/C-Serie)
Technical data
Engine
| Engine model | CNH - F4BE8604Bcorrect |
|---|---|
| Power | 119.3 kWcorrect |
| Rated speed | 2,150 rpmcorrect |
| Torque | 660correct |
| Speed at max. torque | 1,400 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 5,901 cm³correct |
| Aspiration | Turbocharged and intercoolercorrect |
| Coolant capacity | 24.2 lcorrect |
| Engine oil capacity | 17 lcorrect |
Dimensions and weights
| Ground clearance | 475.5correct |
|---|---|
| Unladen weight | 23,050 kgcorrect |
Working data
| Pump flow | 420.2 l/mincorrect |
|---|---|
| Hydraulic oil capacity | 270.3 lcorrect |
| Hydraulic pressure | 343 barcorrect |
| Fuel tank capacity | 292.2 lcorrect |
Other data
| Cab height | 2,977.9correct |
|---|---|
| System voltage | 24 Vcorrect |
More machines with this engine (CNH - F4BE8604B, 3)
Where this model stands
Power-to-weight ratio: 5.2 kW/t (119 kW / 23.1 t)
Stronger than 56% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the New Holland E215LCME have?
The New Holland E215LCME delivers 119 kW.
How much does the New Holland E215LCME weigh?
The unladen weight is 23,050 kg.
What engine does the New Holland E215LCME have?
6 cylinders, 5,901 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Excavator in 3D section
Turn the model, look inside and click an assembly — each one is explained.