Müller TM 16
Built: 1976-1976 · Series: TM
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Müller TM 16 is a tractor from the TM series, built in 1976. It is powered by a six-cylinder engine producing 113 kW.
It runs on diesel; the engine is water-cooled. It was replaced by the Proton Primus Super Trator STA160. Within the range, rated power spans from 113 to 240 kW; with 113 kW, the TM 16 sits at the bottom end. The next one up is the TM 25 with 175 kW.
Technical data
Engine
| Engine make | MWM or Cumminscorrect |
|---|---|
| Engine model | ?; 6BT5.9correct |
| Fuel | dieselcorrect |
| Power | 152 hp (113 kW)correct |
| Cylinders | 6correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | four-wheel driveWDcorrect |
|---|---|
| Forward gears | 12correct |
| Reverse gears | 2correct |
Origin and approval
| Plant | Brazilcorrect |
|---|---|
| Successor | Proton Primus Super Trator STA160correct |
Frequently asked questions
How much power does the Müller TM 16 have?
The Müller TM 16 delivers 152 hp.
What engine does the Müller TM 16 have?
6 cylinders, Diesel.
When was the Müller TM 16 built?
Production years: 1976.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.