Müller TM 14
Built: 1976-1976 · Series: TM
More machines from model year 1976
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Müller TM 14 belongs to the TM series; it rolled off the line as a tractor in 1976. The six-cylinder engine produces 113 kW.
It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 113 to 240 kW; with 113 kW, the TM 14 sits at the bottom end. The next one up is the TM 25 with 175 kW.
Technical data
Engine
| Engine make | Cumminscorrect |
|---|---|
| Engine model | 6BT5.9correct |
| Fuel | dieselcorrect |
| Power | 152 hp (113 kW)correct |
| Cylinders | 6correct |
| Displacement | 5.9 lcorrect |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | four-wheel driveWDcorrect |
|---|---|
| Forward gears | 10correct |
| Reverse gears | 2correct |
Origin and approval
| Plant | Brazilcorrect |
|---|
More machines with this engine (Cummins 6BT5.9, 15)
Frequently asked questions
How much power does the Müller TM 14 have?
The Müller TM 14 delivers 152 hp.
What engine does the Müller TM 14 have?
6 cylinders, Diesel.
When was the Müller TM 14 built?
Production years: 1976.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.