Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Morooka › Other models › MK-300

Morooka MK-300 – specifications

Series: Other models

Build year not documented · Data origin: Reference work (Wikipedia/Wikibooks) · sources

Source: morooka.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Morooka MK-300 is a tractor from Morooka. 220 kW is available.

It runs with tracked.

It is powered by diesel. Within the range, rated power spans from 37 to 220 kW; with 220 kW, the MK-300 sits at the top. Below it ranks the MK-160S with 120 kW.

Morooka – other models: collective page of Japanese crawler carriers from MK-50 to MK-300, 37 to 220 kW (50 to 300 hp), diesel engines, some from Cummins

This page gathers the models of the Japanese maker Morooka that the register could not assign to a range of its own. Morooka builds crawler carriers, tracked haulage vehicles for terrain, forestry and construction, whose load bed sits on tracks rather than wheels. The type designations MK-50 to MK-300 order the eight models by ascending power and size class.

Read on 3 more paragraphs

The register lists here 8 versions with 37 to 220 kW (50 to 300 hp), all with diesel engines; on one model Cummins is recorded as the engine supplier.

Crawler carriers such as Morooka's are used where wheeled vehicles reach their limits on soft, difficult or steep terrain, for example in forestry, earthmoving and on construction sites with poor ground conditions. The low ground pressure of the tracked chassis spares sensitive soils compared with similar wheeled vehicles. They are also called on for pipeline and sewer work, mining and disaster-recovery clean-up, wherever paved access is lacking.

Buying used Morooka crawler carriers calls for checking the rubber tracks and rollers, the tightness of the hydraulic cylinders for the tipping bed and chassis, and the condition of the diesel engine after often hard site or forestry use. Track tension and wear on the drive sprockets are equally telling of how hard the machine has worked. Parts run through the manufacturer and specialist construction-machinery dealers.

Sources: SpecCodex register, model data: Morooka (weitere Modelle)

Technical data

Engine

Fueldieselcorrect
Power300 hp (220 kW)correct

Drivetrain and chassis

Drivetracked undercarriagecorrect

Origin and approval

PlantJapancorrect

Frequently asked questions

How much power does the Morooka MK-300 have?

The Morooka MK-300 delivers 300 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​​​‌‍‌‍‌​‍​​⁠‌⁠⁠​​​⁠

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare