Moeslein ST 3
Built: 2012-2012 · Series: Other models
More machines from model year 2012
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Möslein – other models: low-loader and heavy-duty trailers from Schwebheim, DTD, DTT, ST and STO for construction machinery and farm equipment, unladen weights 1,500 to 12,890 kg, gross weights up to 48,000 kg, widths over 3 m
This page gathers the Möslein trailers the register could not assign to a named range. Möslein Fahrzeugbau is based in Schwebheim in Lower Franconia and specialises in low-loader and heavy-duty trailers for transporting construction machinery and farm equipment, recognisable from model names such as DTD, DTT, ST and STO; the suffix Schwebheim in many model names points to the company's location. The numbers after the codes usually denote axle count or payload class, but the register does not give a fully reliable translation of all the codes.
Read on 3 more paragraphs
The register lists here 132 versions with unladen weights from 1,500 to 12,890 kg and gross weights from 6,500 to 48,000 kg; widths range from 2,460 to 3,050 mm. Lengths are recorded for 104 of the models and range from 5,950 to 13,900 mm.
With gross weights up to 48 tonnes and widths of over three metres, the Möslein trailers rank among the heavy low-loaders for construction machinery, excavators and large farm equipment, a market segment in which, in Germany, regional specialist makers exist alongside the large trailer builders.
On used low-loader trailers of this kind, what counts is the condition of frame and loading ramps, axles and brakes, the function of the hydraulic lowering system where fitted, rust on load-bearing parts, and a complete inspection history; spare parts from a regional specialist maker usually run through direct contact with the works in Schwebheim.
Technical data
Dimensions and weights
| Width | 2,550 mmcorrect |
|---|---|
| Unladen weight | 12,890 kgcorrect |
| Gross vehicle weight | 45,000 kgcorrect |
Drivetrain and chassis
| Wheels | 12correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Moeslein ST 3 weigh?
The unladen weight is 12,890 kg.
What is the gross vehicle weight of the Moeslein ST 3?
45,000 kg.
Up to what speed is the Moeslein ST 3 approved?
Approved up to 100 km/h.
When was the Moeslein ST 3 built?
Production years: 2012.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.