Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Mitsubishi › Other models › FE84P

Mitsubishi FE84P

Built: 2005-2007 · Series: Other models

More machines from model year 2005

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The FE84P comes from Mitsubishi. Production: 2005-2007. The engine has 4 cylinders, with a displacement of 3,908 cm³. The vehicle is 6,400 mm long and 2,220 mm wide. The unladen weight is 3,330 kg. The wheelbase measures 3,350 mm. The gross vehicle weight is 6,500 kg. The vehicle runs on 4 wheels. Unladen weight across the Mitsubishi range ranges from 600 to 34,470 kg; the FE84P sits at the bottom of that range with 3,330 kg. Its immediate neighbours are the CANTER-FE444F/3760 below it with 3,325 kg and the FB634 above it with 3,340 kg. Gross vehicle weight across the Mitsubishi range ranges from 950 to 35,420 kg; here the FE84P sits in the lower part of that range with 6,500 kg. 1264 Mitsubishi models across 48 series are on record.

Mitsubishi Fuso – further models: the collective page for Canter variants outside the named series, from FB through FE to FH cabs and the electric eCanter, 51 to 132 kW, 2.5 to 4.9 litre displacement

This page gathers Mitsubishi Fuso commercial vehicles that the register could not assign to a named series – from light to heavy cab-over trucks, mostly variants of the Canter, built since 1963. Mitsubishi Fuso passed majority ownership to Daimler in 2003 and has belonged to Daimler Truck since the 2019 spin-off; the Canter is built in Japan, in Tramagal in Portugal, in Brazil, India and Taiwan among other places. The type codes follow cab and payload class: FB denotes the compact versions, FE the medium-duty Wide and Narrow cab variants, FH the heavier chassis, with the following digits usually referring to payload or engine output. Since around 2017, the battery-electric eCanter has completed the range.

Read on 3 more paragraphs

The register lists 76 versions here, from light cabs to heavy chassis, with 51 to 132 kW from four- to eight-cylinder engines, 2,470 to 4,948 cm³ displacement, kerb weights up to around 34.5 t at gross vehicle weights up to 35.4 t, lengths from 4,850 to 8,500 mm and widths from 2,000 to 2,750 mm.

The Canter is among the best-selling light trucks in its segment worldwide, competing with the Iveco Daily, Isuzu N-Series and the Ford Transit chassis cab; Fuso is particularly strong in Asia, Latin America and in European municipal and trade traffic, where tipper, refrigerated and flatbed bodies dominate.

When buying used, older FB and FE models warrant checks for frame and brake-line corrosion, clutch and manual gearbox condition, and the tightness of the inline four-cylinder; larger variants call for a look at the turbocharger and intercooler, while newer common-rail engines need their AdBlue and particulate-filter exhaust treatment checked. Spare parts run through the Fuso dealer network, and for older model years also through independent commercial-vehicle parts suppliers.

Sources: SpecCodex register, model data: Mitsubishi (weitere Modelle), Mitsubishi Fuso (manufacturer), Zulassungsdaten Traficom (Finnland)

Technical data

Engine

Cylinders4correct
Displacement3,908 cm³correct

Dimensions and weights

Length6,400 mmcorrect
Width2,220 mmcorrect
Wheelbase3,350 mmcorrect
Unladen weight3,330 kgcorrect
Gross vehicle weight6,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Mitsubishi FE84P weigh?

The unladen weight is 3,330 kg.

What is the gross vehicle weight of the Mitsubishi FE84P?

6,500 kg.

What engine does the Mitsubishi FE84P have?

4 cylinders, 3,908 cm³ displacement.

What are the dimensions of the Mitsubishi FE84P?

6,400 mm × 2,220 mm.

When was the Mitsubishi FE84P built?

Production years: 2005-2007.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare