Mitsubishi CANTER-FB
Built: 2000 · Series: Other models
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mitsubishi Fuso – further models: the collective page for Canter variants outside the named series, from FB through FE to FH cabs and the electric eCanter, 51 to 132 kW, 2.5 to 4.9 litre displacement
This page gathers Mitsubishi Fuso commercial vehicles that the register could not assign to a named series – from light to heavy cab-over trucks, mostly variants of the Canter, built since 1963. Mitsubishi Fuso passed majority ownership to Daimler in 2003 and has belonged to Daimler Truck since the 2019 spin-off; the Canter is built in Japan, in Tramagal in Portugal, in Brazil, India and Taiwan among other places. The type codes follow cab and payload class: FB denotes the compact versions, FE the medium-duty Wide and Narrow cab variants, FH the heavier chassis, with the following digits usually referring to payload or engine output. Since around 2017, the battery-electric eCanter has completed the range.
Read on 3 more paragraphs
The register lists 76 versions here, from light cabs to heavy chassis, with 51 to 132 kW from four- to eight-cylinder engines, 2,470 to 4,948 cm³ displacement, kerb weights up to around 34.5 t at gross vehicle weights up to 35.4 t, lengths from 4,850 to 8,500 mm and widths from 2,000 to 2,750 mm.
The Canter is among the best-selling light trucks in its segment worldwide, competing with the Iveco Daily, Isuzu N-Series and the Ford Transit chassis cab; Fuso is particularly strong in Asia, Latin America and in European municipal and trade traffic, where tipper, refrigerated and flatbed bodies dominate.
When buying used, older FB and FE models warrant checks for frame and brake-line corrosion, clutch and manual gearbox condition, and the tightness of the inline four-cylinder; larger variants call for a look at the turbocharger and intercooler, while newer common-rail engines need their AdBlue and particulate-filter exhaust treatment checked. Spare parts run through the Fuso dealer network, and for older model years also through independent commercial-vehicle parts suppliers.
Sources: SpecCodex register, model data: Mitsubishi (weitere Modelle), Mitsubishi Fuso (manufacturer), Zulassungsdaten Traficom (Finnland)
Technical data
Engine
| Power | 69 kWcorrect |
|---|---|
| Cylinders | 4correct |
| Displacement | 2,830 cm³correct |
Dimensions and weights
| Length | 5,760 mmcorrect |
|---|---|
| Width | 2,000 mmcorrect |
| Unladen weight | 2,890 kgcorrect |
| Gross vehicle weight | 3,550 kgcorrect |
Drivetrain and chassis
| Gears | 5correct |
|---|
Where this model stands
Power-to-weight ratio: 23.9 kW/t (69 kW / 2.9 t)
Stronger than 1% of the trucks in the register — out of 25,242 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Mitsubishi CANTER-FB have?
The Mitsubishi CANTER-FB delivers 69 kW.
How much does the Mitsubishi CANTER-FB weigh?
The unladen weight is 2,890 kg.
What is the gross vehicle weight of the Mitsubishi CANTER-FB?
3,550 kg.
What engine does the Mitsubishi CANTER-FB have?
4 cylinders, 2,830 cm³ displacement.
What are the dimensions of the Mitsubishi CANTER-FB?
5,760 mm × 2,000 mm.
When was the Mitsubishi CANTER-FB built?
Production years: 2000.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
AF 308 F
BA 2998 cm³
BA 3908 cm³
CANTER-FB433/250
CANTER-FB433B/2500
CANTER-FB436B
CANTER-FB436E
CANTER-FB631E/335
CANTER-FB641B/250
CANTER-FB641D/295
CANTER-FE211C-5.5T/2750
CANTER-FE211E-3.5T
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
