Mitsubishi CANTER-FB433E/3350
Built: 1988 · Series: Other models
More machines from model year 1988
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mitsubishi – other vans: the collective page outside the named ranges, from the L200 pickup and the Pajero off-roader to light Canter chassis, 64 to 118 kW
This page gathers the Mitsubishi vans the register could not assign to a named range: the L200 pickup in several cab and drivetrain variants, the Pajero off-roader and several light chassis of the Canter range. Mitsubishi Motors is headquartered in Tokyo; the Canter chassis codes such as FB, FE and the following digits denote the chassis type and approximate gross vehicle weight.
Read on 3 more paragraphs
The register lists 9 versions here with 64 to 118 kW, displacements from 2,420 to 3,290 cm³ from four-cylinder engines, kerb weights from 1,500 to 2,730 kg, lengths from 4,120 to 5,820 mm and widths from 1,660 to 2,300 mm.
This range covers both the pickup and off-roader market, where the L200 and Pajero competed with the Toyota Hilux and Land Cruiser and the Nissan Navara and Patrol, and the light-truck segment of Canter chassis, used in urban distribution work and for bodies such as box conversions and tippers. Many examples from this list moved on to secondary markets outside Europe after years of use.
For a used example, on the L200 and Pajero check rust protection on the frame and wheel arches and the condition of the four-wheel drive and differential locks; on the Canter chassis check the clutch, brakes and body condition and the mileage of the diesel engine; parts come through the Mitsubishi dealer network.
Sources: SpecCodex register, model data: Mitsubishi (weitere Modelle), Mitsubishi Motors
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,420 cm³correct |
Dimensions and weights
| Length | 5,820 mmcorrect |
|---|---|
| Width | 2,145 mmcorrect |
| Unladen weight | 2,075 kgcorrect |
Drivetrain and chassis
| Gears | 5correct |
|---|
Frequently asked questions
How much does the Mitsubishi CANTER-FB433E/3350 weigh?
The unladen weight is 2,075 kg.
What engine does the Mitsubishi CANTER-FB433E/3350 have?
4 cylinders, 2,420 cm³ displacement.
What are the dimensions of the Mitsubishi CANTER-FB433E/3350?
5,820 mm × 2,145 mm.
When was the Mitsubishi CANTER-FB433E/3350 built?
Production years: 1988.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
