StartMotor gradersMitsubishi › MG730

Mitsubishi MG730

Series: Mitsubishi Motor Grader

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mitsubishi MG730 belongs to the Mitsubishi Motor Grader series. The engine delivers 212.9 hp, with a displacement of 11,149.8 cm³. Rated speed is 2,200 rpm. The wheelbase measures 6,452.6 mm. The electrical system runs on 24 V. The engine fitted is the C 6D22-T. Tyre size: 16,00-24-12PR. The Mitsubishi Motor Grader series covers 13 models. Rated output within it ranges from 96.3 to 212.9 hp; the MG730 sits at the top of that range with 212.9 hp. Its immediate neighbours are the MG460 VHP below it with 187.7 hp. 1213 Mitsubishi models across 24 series are on record. The model is listed under Motor graders. 9 verified figures from 1 source are on file.

Technical data

Engine

Engine modelC 6D22-Tcorrect
Power212.9 hpcorrect
Rated speed2,200 rpmcorrect
Displacement11,149.8 cm³correct

Dimensions and weights

Length9,616.4correct
Wheelbase6,452.6correct

Drivetrain and chassis

Gearbox typepower shift, planetary gear, hydraulically actuatedcorrect
Tyre size16.00-24-12PRcorrect
System voltage24 Vcorrect

Frequently asked questions

How much power does the Mitsubishi MG730 have?

The Mitsubishi MG730 delivers 213 hp.

What engine does the Mitsubishi MG730 have?

11,150 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Grader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare