StartMotor gradersMitsubishi › MG330

Mitsubishi MG330

Series: Mitsubishi Motor Grader

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The MG330 from Mitsubishi is part of the Mitsubishi Motor Grader series. The engine delivers 136.9 hp, with a displacement of 7,546.2 cm³. Rated speed is 2,200 rpm. The wheelbase measures 5,300.5 mm. The electrical system runs on 24 V. The engine fitted is the C 6D16-TE1. Tyre size: 13,00-24-8PR. The Mitsubishi Motor Grader series covers 13 models. Rated output within it ranges from 96.3 to 212.9 hp; the MG330 sits in the lower part of that range with 136.9 hp. Its immediate neighbours are the MG230 below it with 116.6 hp and the MG430-E above it with 157.1 hp. 1213 Mitsubishi models across 24 series are on record. The model is listed under Motor graders. 9 verified figures from 1 source are on file.

Technical data

Engine

Engine modelC 6D16-TE1correct
Power136.9 hpcorrect
Rated speed2,200 rpmcorrect
Displacement7,546.2 cm³correct

Dimensions and weights

Length7,821.2correct
Wheelbase5,300.5correct

Drivetrain and chassis

Gearbox typepower shift, planetary gear, hydraulically actuatedcorrect
Tyre size13.00-24-8PRcorrect
System voltage24 Vcorrect

Frequently asked questions

How much power does the Mitsubishi MG330 have?

The Mitsubishi MG330 delivers 137 hp.

What engine does the Mitsubishi MG330 have?

7,546 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Grader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare