Mft Eicher 666 VAC
Built: 1993–2001 · Series: 600 er - Reihe
More machines from model year 1993
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
MFT 600 series – register collective page for Eicher tractors 656 to 680: three- to four-cylinder diesels, 2,925 to 3,927 cm3 displacement, 41 to 59 kW, VC and VAC variants
The MFT 600 series gathers in the register four Eicher tractors of the 656, 666 and 680 types, which fall into a shared power class based on their three-digit type number. The additional letters VC and VAC mark separate equipment variants of these models. Eicher built its field tractors with such three-digit type numbers over several decades in Bavaria, before production later moved into other corporate structures.
Read on 3 more paragraphs
The register lists here four versions with 41 to 59 kW from three- to four-cylinder engines of 2,925 to 3,927 cm3 displacement. Unladen weight ranges from 2,170 to 2,385 kg, overall length from 2,965 to 3,530 mm, width from 1,035 to 1,230 mm and height from 2,070 to 2,210 mm. Rated speed sits at 2,100 rpm.
With their power band of 41 to 59 kW, these Eicher models covered the mid segment of West German field tractors of their time and were used on mixed farms for fieldwork, transport and PTO work such as forage chopping or driving pumps.
On these tractors, what counts is the condition of the frame and mudguards for rust, wear on the clutch and gearbox, the tightness of the hydraulics and lift linkage, and the function of the lighting system and instruments. Spare parts are today obtained mainly through specialist Eicher vintage-tractor dealers and relevant tractor clubs.
Sources: SpecCodex register, model data: MFT 600er-Reihe
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 66 hp (49 kW)correct |
| Rated speed | 2,100 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 2,925 cm³correct |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 2,990 mmcorrect |
|---|---|
| Width | 1,050 mmcorrect |
| Height | 2,210 mmcorrect |
| Wheelbase | 2,062 mmcorrect |
| Ground clearance | 300 mmcorrect |
| Unladen weight | 2,385 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 12V/12Rcorrect |
| Front tyres | 7.50-16correct |
| Rear tyres | 12.4-24correct |
| Top speed | 30 km/hcorrect |
Where this model stands
Power-to-weight ratio: 20.5 kW/t (49 kW / 2.4 t)
Power class: Universal (40–100 hp)
Stronger than 46% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Mft Eicher 666 VAC have?
The Mft Eicher 666 VAC delivers 66 hp.
How much does the Mft Eicher 666 VAC weigh?
The unladen weight is 2,385 kg.
What engine does the Mft Eicher 666 VAC have?
3 cylinders, 2,925 cm³ displacement, Diesel.
How fast does the Mft Eicher 666 VAC go?
Top speed is 30 km/h.
What are the dimensions of the Mft Eicher 666 VAC?
2,990 mm × 1,050 mm × 2,210 mm.
When was the Mft Eicher 666 VAC built?
Production years: 1993–2001.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.