Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Mercedes Benz › Antos › 1835L 4x2

Mercedes Benz 1835L 4x2

Built: 2015 · Series: Antos

More machines from model year 2015

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 1835L 4x2, Mercedes Benz offers a model from the Antos series. Production: 2015. The engine delivers 260 kW, has 6 cylinders, with a displacement of 7,698 cm³. The vehicle is 8,910 mm long and 2,550 mm wide. The unladen weight is 11,080 kg. The gross vehicle weight is 19,500 kg. The Antos series covers 24 models. Rated output within it ranges from 175 to 350 kW; the 1835L 4x2 sits in the middle of that range with 260 kW. Its immediate neighbours are the Antos 2433 below it with 240 kW and the Antos 2540 above it with 290 kW. Unladen weight within it ranges from 10,120 to 27,750 kg; here the 1835L 4x2 sits at the bottom of that range with 11,080 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz Antos – the distribution truck since 2012 below the Actros: six-cylinders of 7.7 to 12.8 litres, 175 to 350 kW, 18 to 37 tonnes gross vehicle weight

Mercedes-Benz introduced the Antos in 2012 as successor to the Axor for medium and heavy distribution and construction-site transport, positioned below the long-haul flagship Actros and fitted with its modern cab technology. The type key follows Mercedes-Benz's classic logic: the first two digits give the weight class in tonnes, the following ones the engine power in hp divided by ten – Antos 1832 thus 18 tonnes with about 320 hp, Antos 2543 25 tonnes with about 430 hp. The suffix L denotes a long-wheelbase version, Lnr the version without a retarder; the axle formulas range from the two-axle 4X2 distribution version to the three-axle 8X2/6 construction vehicle.

Read on 3 more paragraphs

The register lists here 24 versions with 175 to 350 kW throughout six cylinders of 7,698 to 12,809 cm³ displacement, unladen weights from 7,790 to 27,750 kg, gross vehicle weights from 18,000 to 37,000 kg, lengths from 7,800 to 12,000 mm and widths from 2,550 to 2,600 mm.

The Antos serves the segment between the lighter Atego and the heavy Actros and competes there with the DAF CF, the Volvo FM and the Scania P and G range; its main field of use is urban and regional distribution transport and, with corresponding bodies, construction and municipal work.

Buying used, on the Antos operating hours and the service history of the engine and exhaust aftertreatment, the condition of the clutch and automated PowerShift transmission, rust on the frame and body fittings, and on construction vehicles the condition of the transfer case and differential locks all count; spare parts run through the Mercedes-Benz Trucks service network.

Sources: SpecCodex register, model data: Mercedes-Benz Antos, Mercedes-Benz Trucks (manufacturer)

Technical data

Engine

Power260 kWcorrect
Cylinders6correct
Displacement7,698 cm³correct

Dimensions and weights

Length8,910 mmcorrect
Width2,550 mmcorrect
Unladen weight11,080 kgcorrect
Gross vehicle weight19,500 kgcorrect

Where this model stands

Power-to-weight ratio: 23.5 kW/t (260 kW / 11.1 t)

Stronger than 43% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz 1835L 4x2 have?

The Mercedes Benz 1835L 4x2 delivers 260 kW.

How much does the Mercedes Benz 1835L 4x2 weigh?

The unladen weight is 11,080 kg.

What is the gross vehicle weight of the Mercedes Benz 1835L 4x2?

19,500 kg.

What engine does the Mercedes Benz 1835L 4x2 have?

6 cylinders, 7,698 cm³ displacement.

What are the dimensions of the Mercedes Benz 1835L 4x2?

8,910 mm × 2,550 mm.

When was the Mercedes Benz 1835L 4x2 built?

Production years: 2015.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare