Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Mercedes Benz › 411 › U 30 ( 411.110 )

Mercedes Benz U 30 ( 411.110 )

Built: 1956–1961 · Series: 411

More machines from model year 1956

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the U 30 ( 411.110 ), Mercedes Benz offers a model from the 411 series. Production: 1956–1961. The engine delivers 30 hp (22.4 kW), has 4 cylinders, with a displacement of 1,767 cm³. Rated speed is 2,550 rpm. The machine is 3,460 mm long, 1,630 mm wide and 2,035 mm high. The unladen weight is 1,795 kg. The wheelbase measures 1,720 mm. Top speed is 53.1 km/h. Transmission: 6V / 2R. The engine is water-cooled. Tyres: front 7.50-18, rear 7.50-18. The fuel is diesel. The bore measures 75 mm. The stroke is 100 mm. Construction: rectangular U-section frame. Around 8977 units were built. Rated output across the Mercedes Benz range ranges from 24 to 299 hp; the U 30 ( 411.110 ) sits at the bottom of that range with 30 hp. Its immediate neighbours are the U 25 below it with 25 hp and the U 40 above it with 40 hp. Rated output across the Mercedes Benz range ranges from 17.7 to 220 kW; here the U 30 ( 411.110 ) sits at the bottom of that range with 22.4 kW. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz Unimog U 30 of series 411.110: a water-cooled four-cylinder diesel implement carrier producing 22.4 kW (30 hp), built 1956 to 1961, with an unladen weight of 1,795 kg and a top speed of 53.1 km/h.

The U 30 of series 411 belongs to the early Unimog (Universal-Motor-Gerät) series from Mercedes-Benz in the 1950s. The vehicle recorded here (411.110) dates from 1956 to 1961, from the period when the Unimog established its reputation as an off-road, multi-purpose vehicle for agriculture and construction.

Read on 3 more paragraphs

The U 30 is powered by a water-cooled four-cylinder diesel engine with 1,767 cm3 displacement, producing 22.4 kW (30 hp) at a rated speed of 2,550 rpm. At an unladen weight of 1,795 kg, a wheelbase of 1,720 mm and a width of 1,630 mm, it is one of the most compact and lightest Unimog series, with a top speed of 53.1 km/h. Height and length are 2,035 mm and 3,460 mm.

At just over 1.7 tonnes and with a small four-cylinder engine, the U 30 belongs to the early, compact Unimog models designed for work with light implements in agriculture and municipal services, before the series grew over the following decades into noticeably heavier and more powerful variants. Portal axles and front and rear power take-offs were already features of this early version.

When buying a 1950s Unimog U 30, given its age of over sixty years, the frame and body panels need particular checking for rust damage. The portal axles should be checked for oil level and wear in the reduction gearing, and since spare parts for this early series are rarer than for later Unimog generations, the completeness of the mounting spaces and original implements is an important value factor.

Sources: SpecCodex-Register: Kennwerte des Modells Mercedes-Benz Unimog U 30 (411.110)

Technical data

Engine

Fueldieselcorrect
Power30 hp (22.4 kW)correct
Rated speed2,550 rpmcorrect
Cylinders4correct
Displacement1,767 cm³correct
Bore75 mmcorrect
Stroke100 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,460 mmcorrect
Width1,630 mmcorrect
Height2,035 mmcorrect
Wheelbase1,720 mmcorrect
Unladen weight1,795 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox6V / 2Rcorrect
Front tyres7.50-18correct
Rear tyres7.50-18correct
Top speed53.1 km/hcorrect

Origin and approval

ConstructionRechteckrahmen aus U-Profilcorrect
Units built8,977correct

Where this model stands

Power-to-weight ratio: 12.5 kW/t (22 kW / 1.8 t)

Power class: Compact (< 40 hp)

Stronger than 18% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz U 30 ( 411.110 ) have?

The Mercedes Benz U 30 ( 411.110 ) delivers 30 hp.

How much does the Mercedes Benz U 30 ( 411.110 ) weigh?

The unladen weight is 1,795 kg.

What engine does the Mercedes Benz U 30 ( 411.110 ) have?

4 cylinders, 1,767 cm³ displacement, Diesel.

How fast does the Mercedes Benz U 30 ( 411.110 ) go?

Top speed is 53.1 km/h.

What are the dimensions of the Mercedes Benz U 30 ( 411.110 )?

3,460 mm × 1,630 mm × 2,035 mm.

When was the Mercedes Benz U 30 ( 411.110 ) built?

Production years: 1956–1961.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare