StartTractorsMcCormick › MC120 Power6

McCormick MC120 Power6 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the McCormick MC120 Power6 belongs to the McCormick 4WD Tractor series. Under the bonnet works a six-cylinder engine displacing 6 litres, producing 117 hp (85.8 kW). Rated power arrives at 2,200 rpm — the engine pulls from low down rather than needing to be revved.

It will not go faster than 38 km/h — a working pace, not a travelling one. Unladen, it tips the scales at 5,830 kg.

Within the range, rated power spans from 28.4 to 194 hp; with 117 hp, the MC120 Power6 sits in the upper third. Directly alongside are the MTX120 with 116 hp below and the MC115 with 120 hp above.

Technical data

Engine

Power116.6 hp (85.8 kW)correct
Rated speed2,200 rpmcorrect
Cylinders6correct
Displacement6,000.9 cm³correct
Aspirationturbocharged wastegate intercoolercorrect

Dimensions and weights

Unladen weight5,830 kgcorrect

Drivetrain and chassis

Forward gears16correct
Reverse gears12correct
Tyre sizefront 14.9/28 rear 18.4/38correct
Top speed37.7 km/hcorrect

Working data

Pump flow109 l/mincorrect
Fuel tank capacity265.4 lcorrect

Other data

Height2,810.3correct

Where this model stands

Power-to-weight ratio: 14.7 kW/t (86 kW / 5.8 t)

Power class: Large (100–180 hp)

Stronger than 74% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the McCormick MC120 Power6 have?

The McCormick MC120 Power6 delivers 117 hp.

How much does the McCormick MC120 Power6 weigh?

The unladen weight is 5,830 kg.

What engine does the McCormick MC120 Power6 have?

6 cylinders, 6,001 cm³ displacement.

How fast does the McCormick MC120 Power6 go?

Top speed is 37.7 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare