StartTractorsMcCormick › C60 Max

McCormick C60 Max 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The McCormick C60 Max is a tractor from the McCormick 4WD Tractor series. The three-cylinder engine, displacing 3.3 litres, produces 59 hp (43.6 kW). Rated power arrives at 2,200 rpm — the engine pulls from low down rather than needing to be revved.

It will not go faster than 40 km/h — a working pace, not a travelling one. Unladen, it tips the scales at 2,920 kg.

Within the range, rated power spans from 28.4 to 194 hp; with 59.3 hp, the C60 Max sits in the lower third. Directly alongside are the CN59 with 55.8 hp below and the C75 Max with 69.1 hp above.

Technical data

Engine

Engine model1103C-33correct
Power59.3 hp (43.6 kW)correct
Rated speed2,200 rpmcorrect
Cylinders3correct
Displacement3,300.4 cm³correct

Dimensions and weights

Unladen weight2,920 kgcorrect

Drivetrain and chassis

Gearbox typemec. rev. shuttlecorrect
Forward gears24correct
Reverse gears12correct
Tyre sizefront 11.2-24 rear 12.4-36correct
Top speed40.1 km/hcorrect

Working data

Pump flow82.5 l/mincorrect
Hydraulic pressure180correct
Fuel tank capacity102.2 lcorrect

Other data

Height2,459.7correct

Where this model stands

Power-to-weight ratio: 14.9 kW/t (44 kW / 2.9 t)

Power class: Universal (40–100 hp)

Stronger than 42% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the McCormick C60 Max have?

The McCormick C60 Max delivers 59.3 hp.

How much does the McCormick C60 Max weigh?

The unladen weight is 2,920 kg.

What engine does the McCormick C60 Max have?

3 cylinders, 3,300 cm³ displacement.

How fast does the McCormick C60 Max go?

Top speed is 40.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare