Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › McCormick › B-275 › B275

McCormick B275 (1605 kg)

Built: 1962-1963 · Series: B-275

More machines from model year 1962

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The B-275 series from McCormick includes the B275. Production: 1962-1963. The engine delivers 35 hp (26 kW), has 4 cylinders, with a displacement of 2,360 cm³. Torque is 129 Nm. Rated speed is 1,875 rpm. The machine is 2,840 mm long, 2,250 mm wide and 1,540 mm high. The unladen weight is 1,605 kg. The wheelbase measures 1,883 mm. Top speed is 22 km/h. The tank holds 39.7 litres. Transmission: 8 V/2 R. The gross vehicle weight is 2,240 kg. The gearbox offers 10 gears. The gearbox offers 8 forward gears. There are also 2 reverse gears. The linkage is category I/II. The B-275 series covers 7 models. 381 McCormick models across 40 series are on record.

McCormick B-275 – the range page of the IH Doncaster classic from 1958 to 1968, with the B-275 Diesel version, 26 kW, four-cylinder of 2.36 l displacement

This page gathers the versions of the McCormick B-275, built by International Harvester at the Doncaster plant in England from 1958 to 1968. Besides the base version, the register lists the B-275 Diesel version and the chassis-numbered variants B-275 Diesel/1880-61 and B-275 Diesel/1880-63.

Read on 3 more paragraphs

The register lists here 7 versions with an output of 26 kW (35 hp) from four-cylinders of 2,360 cm³ displacement, unladen weights of 1,605 to 1,640 kg, lengths of 2,840 to 2,910 mm, widths of 1,750 to 2,250 mm; also recorded are a height of 1,540 mm, a gross weight of 2,240 kg and a torque of 129 Nm at a rated speed of 1,875 rpm.

The B-275 is among the most-built IH Doncaster tractors of its class and was a widespread all-purpose tractor for smaller and mid-sized farms in Britain and the Commonwealth, with which International Harvester competed against Ferguson and Fordson. Its four-cylinder diesel and simple mechanical layout made it a straightforward tractor to maintain, which contributed to its long service life on many farms.

On the used B-275, engine and injection-pump condition, clutch and gearbox, rust on bodywork, mudguards and radiator, and the originality of seat, mudguards and lighting count; parts run through dealers and clubs specialising in IH classics.

Sources: SpecCodex register, model data: McCormick B-275, International Harvester (Wikipedia)

Technical data

Engine

Power35 hp (26 kW)correct
Rated speed1,875 rpmcorrect
Torque129 Nmcorrect
Cylinders4correct
Displacement2,360 cm³correct

Dimensions and weights

Length2,840 mmcorrect
Width2,250 mmcorrect
Height1,540 mmcorrect
Wheelbase1,883 mmcorrect
Unladen weight1,605 kgcorrect
Gross vehicle weight2,240 kgcorrect

Drivetrain and chassis

Gearbox8 V/2 Rcorrect
Gears10correct
Forward gears8correct
Reverse gears2correct
Top speed22 km/hcorrect

Working data

Fuel tank capacity39.7 lcorrect

Other data

Linkage categoryCat I/IIcorrect

Where this model stands

Power-to-weight ratio: 16.2 kW/t (26 kW / 1.6 t)

Power class: Compact (< 40 hp)

Stronger than 21% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the McCormick B275 have?

The McCormick B275 delivers 35 hp.

How much does the McCormick B275 weigh?

The unladen weight is 1,605 kg.

What is the gross vehicle weight of the McCormick B275?

2,240 kg.

What engine does the McCormick B275 have?

4 cylinders, 2,360 cm³ displacement.

How fast does the McCormick B275 go?

Top speed is 22 km/h.

What are the dimensions of the McCormick B275?

2,840 mm × 2,250 mm × 1,540 mm.

When was the McCormick B275 built?

Production years: 1962-1963.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare