Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Massey Ferguson › FE-35 › FE35

Massey Ferguson FE35

Built: 1964 · Series: FE-35

More machines from model year 1964

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Massey Ferguson FE35 belongs to the FE-35 series. Production: 1964. The engine delivers 31.8 kW, has 3 cylinders, with a displacement of 2,500 cm³. The machine is 2,970 mm long and 1,990 mm wide. The unladen weight is 1,480 kg. The gearbox offers 6 gears. The FE-35 series covers 7 models. Rated output within it ranges from 27 to 31.8 kW; the FE35 sits at the top of that range with 31.8 kW. Its immediate neighbours are the FE-35/1830-63 below it with 30.5 kW. 1668 Massey Ferguson models across 56 series are on record.

Massey Ferguson FE-35 – the successor to the Ferguson TE-20 from Coventry, 1956 to 1964, three-cylinder of 2,500 cm³, 27 to 32 kW, unladen weight 1,480 kg

The FE-35 was the successor to the Ferguson TE-20, which started production in 1956 at the Banner Lane plant in Coventry and, after the 1957 merger of Massey-Harris and Ferguson, became the new Massey Ferguson brand's first shared tractor; the 1830 model designation refers to the engine code. The suffixes -60, -62, -63 and -64 in the model names on this collective page give the successive production years up to replacement by the MF 35 X range in 1964. The 1830 engine is a Perkins three-cylinder diesel that also powered other vehicles and stationary equipment of the period.

Read on 3 more paragraphs

The register lists here 7 versions with 27 to 31.8 kW from three-cylinders of 2,500 cm³, an unladen weight of 1,480 kg, a length of 2,970 mm and widths from 1,630 to 2,350 mm.

The FE-35 carried Harry Ferguson's three-point hydraulics with draft control under the Massey Ferguson name for the first time and became one of Britain's most-built tractors; among farmers and collectors it is still regarded as a classic of post-war mechanisation. In Britain, Ireland and the Commonwealth countries, the FE-35 shaped a whole generation of farmers who used effective three-point hydraulics for the first time through it.

On these classics, engine condition and the cylinder-head gasket count, the condition of the three-point hydraulics and draft control, clutch and gearbox, and rust on bodywork and mudguards; spare parts for the Perkins engine and the hydraulics are well available through the specialist classic-tractor market.

Sources: SpecCodex register, model data: Massey Ferguson FE-35, Massey Ferguson (AGCO, Hersteller)

Technical data

Engine

Power31.8 kWcorrect
Cylinders3correct
Displacement2,500 cm³correct

Dimensions and weights

Length2,970 mmcorrect
Width1,990 mmcorrect
Unladen weight1,480 kgcorrect

Drivetrain and chassis

Gears6correct

Where this model stands

Power-to-weight ratio: 21.5 kW/t (32 kW / 1.5 t)

Power class: Universal (40–100 hp)

Stronger than 28% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Massey Ferguson FE35 have?

The Massey Ferguson FE35 delivers 31.8 kW.

How much does the Massey Ferguson FE35 weigh?

The unladen weight is 1,480 kg.

What engine does the Massey Ferguson FE35 have?

3 cylinders, 2,500 cm³ displacement.

What are the dimensions of the Massey Ferguson FE35?

2,970 mm × 1,990 mm.

When was the Massey Ferguson FE35 built?

Production years: 1964.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare