Massey Ferguson FE-35/1830
Built: 2013 · Series: FE-35
More machines from model year 2013
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Massey Ferguson FE-35 – the successor to the Ferguson TE-20 from Coventry, 1956 to 1964, three-cylinder of 2,500 cm³, 27 to 32 kW, unladen weight 1,480 kg
The FE-35 was the successor to the Ferguson TE-20, which started production in 1956 at the Banner Lane plant in Coventry and, after the 1957 merger of Massey-Harris and Ferguson, became the new Massey Ferguson brand's first shared tractor; the 1830 model designation refers to the engine code. The suffixes -60, -62, -63 and -64 in the model names on this collective page give the successive production years up to replacement by the MF 35 X range in 1964. The 1830 engine is a Perkins three-cylinder diesel that also powered other vehicles and stationary equipment of the period.
Read on 3 more paragraphs
The register lists here 7 versions with 27 to 31.8 kW from three-cylinders of 2,500 cm³, an unladen weight of 1,480 kg, a length of 2,970 mm and widths from 1,630 to 2,350 mm.
The FE-35 carried Harry Ferguson's three-point hydraulics with draft control under the Massey Ferguson name for the first time and became one of Britain's most-built tractors; among farmers and collectors it is still regarded as a classic of post-war mechanisation. In Britain, Ireland and the Commonwealth countries, the FE-35 shaped a whole generation of farmers who used effective three-point hydraulics for the first time through it.
On these classics, engine condition and the cylinder-head gasket count, the condition of the three-point hydraulics and draft control, clutch and gearbox, and rust on bodywork and mudguards; spare parts for the Perkins engine and the hydraulics are well available through the specialist classic-tractor market.
Sources: SpecCodex register, model data: Massey Ferguson FE-35, Massey Ferguson (AGCO, Hersteller)
Technical data
Engine
| Displacement | 2,500 cm³correct |
|---|
Dimensions and weights
| Width | 1,630 mmcorrect |
|---|---|
| Unladen weight | 1,480 kgcorrect |
Frequently asked questions
How much does the Massey Ferguson FE-35/1830 weigh?
The unladen weight is 1,480 kg.
What engine does the Massey Ferguson FE-35/1830 have?
2,500 cm³ displacement.
When was the Massey Ferguson FE-35/1830 built?
Production years: 2013.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
