Technical register for agricultural, construction and commercial machinery · sourced data

Massey Ferguson 1250

Built: 1979-1982 · Series: Other models

More machines from model year 1979

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Massey Ferguson 1250 is a machine built by Massey Ferguson. Production: 1979-1982. The engine delivers 112 hp (84.6 kW), with a displacement of 5,801 cm³. The engine comes from Perkins. Rated speed is 2,400 rpm. The machine is 5,170 mm long, 2,560 mm wide and 3,214 mm high. The unladen weight is 5,200 kg. The wheelbase measures 2,559 mm. Top speed is 25 km/h. Lifting capacity is 4,368 kg. The tank holds 318 litres. Transmission: Multipower. The engine is water-cooled. Tyres: front 16.9 x 34, rear 16.9 x 34. The model was built in Barton Rd Manchester, England. The fuel is diesel. The engine fitted is the Perkins A6,354,4. The gearbox offers 12 forward gears. There are also 4 reverse gears. The linkage is category I, II or III. Its predecessor was the MF 1200. It was succeeded by the dropped till MF48xx imported. Rated output across the Massey Ferguson range ranges from 7 to 460 hp; the 1250 sits in the lower part of that range with 112 hp. Its immediate neighbours are the MF5711SL below it with 110 hp and the MF 3610 above it with 113 hp. Rated output across the Massey Ferguson range ranges from 5.2 to 340 kW; here the 1250 sits in the lower part of that range with 84.6 kW. 1668 Massey Ferguson models across 56 series are on record.

Massey Ferguson – other models: the collective page of tractors outside the named ranges, from the MF 35 and 135 through the 1000, 2000 and 3000 series to the MF 1200 (compact) and the 8700 S, 5 to 313 kW, Perkins

This page gathers the Massey Ferguson tractors the register could not assign to a named range – from the classics of the 1950s and 1960s such as the MF 35 and MF 135 from Coventry to current compact tractors and big tractors. Massey Ferguson emerged in 1953 from the merger of Massey-Harris (Toronto) with Harry Ferguson's tractor company, whose three-point hydraulics with draft control became the world standard; since 1994 the brand has belonged to AGCO, which builds the tractors in Beauvais, France, and sources the compact class from Iseki in Japan. The brand's type logic changed several times: the three-digit types 130 to 1200 of the 1960s and 1970s order the size in ascending order, the four-digit 1000 to 8000 series of the 1980s to 2000s give the range in the thousands digit and the model in the remaining digits (MF 1250 as compact, MF 3060 as mid-range), and since 2005 two digits mark the range and the last two the power step – MF 5710 as a 5700 with about 100 hp, MF 8737 as an 8700 with about 370 hp; S and the suffix Dyna-VT denote equipment and stepless transmission. The engines come from Perkins (the AD3.152 and 1104 series), AGCO Power (formerly Sisu) in the big and Iseki, Simpson (India) and Kohler in the small models.

Read on 3 more paragraphs

The register lists here 1,011 versions with 5.2 to 313 kW from one- to eight-cylinders of 1,123 to 8,419 cm³, PTO outputs from 19 to 290 hp, lift capacities from 540 to 9,950 kg, unladen weights from 670 to 12,000 kg, lengths from 2,480 to 6,200 mm and widths from 1,003 to 3,000 mm.

By unit numbers Massey Ferguson is one of the world's best-selling tractor brands, with strongholds in Britain, France, Scandinavia, Africa and South Asia, where the MF 240 and its Indian and Pakistani licence builds shape the market.

Used, the span is as wide as the brand: on classics originality and Perkins parts count, on compacts hydrostat and front loader, on the 5700 to 8700 operating hours, Dyna transmissions, electronics and exhaust aftertreatment; parts run through AGCO and Perkins.

Sources: SpecCodex register, model data: Massey Ferguson (weitere Modelle), Massey Ferguson (AGCO, Hersteller)

Technical data

Engine

Engine makePerkinscorrect
Engine modelPerkins A6.354.4correct
Fueldieselcorrect
Power112 hp (84.6 kW)correct
Rated speed2,400 rpmcorrect
Cylinders6correct
Displacement5,801 cm³ (5.7 ci)correct
Bore98.4 mmcorrect
Stroke127 mmcorrect
Naturally aspiratednaturally aspiratedcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length5,170 mmcorrect
Length5,170 mmcorrect
Width2,560 mmcorrect
Width2,030 mmcorrect
Height3,214 mmcorrect
Wheelbase2,559 mmcorrect
Unladen weight5,200 kg (6,200 lbs)correct

Drivetrain and chassis

Drivefour-wheel driveWDcorrect
GearboxMultipowercorrect
Gearbox makeMFcorrect
Forward gears12correct
Reverse gears4correct
Front tyres16.9 x 34correct
Rear tyres16.9 x 34correct
Top speed25 km/hcorrect

Working data

Lifting capacity4,368 kgcorrect
Lifting capacity4,368 kgcorrect
Fuel tank capacity318 l (318 gal)correct

Origin and approval

PlantBarton Rd Manchester, Englandcorrect
CabSafetycorrect

Other data

Cab makeMF Safetycorrect
Linkage categoryCat I, Cat II or Cat IIIcorrect
PredecessorMF 1200correct
Successordropped till MF48xx importedcorrect

Where this model stands

Power-to-weight ratio: 16.3 kW/t (85 kW / 5.2 t)

Power class: Large (100–180 hp)

Stronger than 72% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Massey Ferguson 1250 have?

The Massey Ferguson 1250 delivers 112 hp.

How much does the Massey Ferguson 1250 weigh?

The unladen weight is 5,200 kg.

What engine does the Massey Ferguson 1250 have?

6 cylinders, 5,801 cm³ displacement, Diesel.

How fast does the Massey Ferguson 1250 go?

Top speed is 25 km/h.

How much does the rear linkage of the Massey Ferguson 1250 lift?

The rear linkage lifts 4,368 kg.

What are the dimensions of the Massey Ferguson 1250?

5,170 mm × 2,560 mm × 3,214 mm.

When was the Massey Ferguson 1250 built?

Production years: 1979-1982.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 41 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare