Massey Ferguson MF 355 (A) – specifications
Built: 1988–1994 · Series: 300er-Baureihe
The MF 355 (A) from Massey Ferguson is part of the 300er series. Production: 1988–1994. The engine delivers 53 hp (39 kW), has 3 cylinders, with a displacement of 2,505 cm³. Torque is 186 Nm. Rated speed is 2,250 rpm. The machine is 3,400 mm long, 1,800 mm wide and 2,410 mm high. The unladen weight is 2,650 kg. The wheelbase measures 2,080 mm. Top speed is 30 km/h. Transmission: 8V/2R. The engine is water-cooled. Tyres: front 7.50-18 ASF (A: 11.2-24 AS), rear 13.6-36 AS (A: 16.9-30 AS). The fuel is diesel. The bore measures 91.44 mm. The stroke is 127 mm. Maximum torque is reached at 1,500 rpm. Construction: unit construction (no separate frame). The 300er-Baureihe series covers 15 models. Rated output within it ranges from 42 to 97 hp; the MF 355 (A) sits in the lower part of that range with 53 hp. Its immediate neighbours are the MF 350 below it with 47 hp and the MF 352 (A) above it with 55 hp. Unladen weight within it ranges from 2,324 to 3,600 kg; here the MF 355 (A) sits in the lower part of that range with 2,650 kg. 1668 Massey Ferguson models across 56 series are on record.
Data for the version built 1988–1994 · Data origin: Reference work (Wikipedia/Wikibooks) · sources
More machines from model year 1988
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
MF 300: solid mid-range of the late 80s and 90s, 47 to 90 hp, three-, four- and six-cylinder diesels, also built under licence in Brazil and South Africa
From the late 1980s, the 300 series took over the 200 series' role as Massey Ferguson's mid-range class and stayed in the catalogue into the late 1990s, alongside the newer 3000 and 4200 series in the upper segment.
Read on 4 more paragraphs
The register lists 15 live models, from the MF 340 (A) to the MF 390 (A), built between 1987 and 1998. Output ranges from 30.9 to 71.4 kW, or 47 to 90 hp, weight from 2,324 to 3,600 kg, displacement from 2,500 to 5,806 cm3, across three-, four- and six-cylinder engines.
Like its predecessors, the 300 series spanned a broad power range from a compact three-cylinder up to a six-cylinder flagship, and was built under licence worldwide, including at plants in Brazil and South Africa.
As a rugged, technically straightforward mid-range line without complex electronics, the MF 300 ranks today among the sought-after used tractors for smaller operations.
When buying used, check clutch and gearbox condition – mechanical or with powershift stages depending on specification –, the tightness of the lift hydraulics, and rust on cab and body panels; on examples built under licence in Brazil or South Africa, specification can differ slightly from the European version. Parts today run through the global dealer network of the AGCO group, which Massey Ferguson belongs to. The mechanical and powershift versions of this series share the same base engine, so many wear parts are interchangeable between the two variants.
Sources: SpecCodex register, model data: Massey Ferguson 300er-Baureihe
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 53 hp (39 kW)correct |
| Rated speed | 2,250 rpmcorrect |
| Torque | 186 Nmcorrect |
| Speed at max. torque | 1,500 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 2,505 cm³correct |
| Bore | 91.44 mmcorrect |
| Stroke | 127 mmcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,400 mmcorrect |
|---|---|
| Width | 1,800 mmcorrect |
| Height | 2,410 mmcorrect |
| Wheelbase | 2,080 mmcorrect |
| Unladen weight | 2,650 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 8V/2Rcorrect |
| Front tyres | 7.50-18 ASF (A: 11.2-24 AS)correct |
| Rear tyres | 13.6-36 AS (A: 16.9-30 AS)correct |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Frequently asked questions
Where this model stands
Power-to-weight ratio: 14.7 kW/t (39 kW / 2.6 t)
Power class: Universal (40–100 hp)
Stronger than 37% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
MF 340 (A)
MF 342 (A)
MF 350
MF 352 (A)
MF 360 (A)
MF 362 (A)
MF 365 (A)
MF 372 (A)
MF 375 (A)
MF 382 A
MF 390 (A)
MF 390 Turbo
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.