Massey Ferguson MF 2680
Built: 1980–1985 · Series: 2000er-Baureihe, zweite Generation
More machines from model year 1980
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Massey Ferguson 2620 to 2720 A – the second generation of the 2000 series from Beauvais: six-cylinders of 5,797 cm³, 70.7 to 113.3 kW, up to 6,140 kg unladen weight
The MF 2620, MF 2640 Turbo, MF 2680 and MF 2720 A form the second generation of the Massey Ferguson 2000 series, built by AGCO in Beauvais, France. All four models share the same six-cylinder block of 5,797 cm³, stepped through naturally aspirated, turbocharged and the top 2720 A version; the last two digits of the type code order the power step within the range. Beauvais had already built Massey Ferguson's earlier six-cylinder ranges, so the 2000 series could draw on established engine and transmission production.
Read on 3 more paragraphs
The register lists 4 versions with 70.7 to 113.3 kW from six-cylinders of a consistent 5,797 cm³. Unladen weights range from 4,800 to 6,140 kg, lengths from 4,700 to 5,080 mm, widths from 2,120 to 2,430 mm and heights from 2,810 to 2,860 mm; torque sits between 352 and 493 Nm at rated speeds of 2,000 to 2,400 rpm, all with diesel engines.
The 2000 series occupied the big-tractor class of the 1990s between the more compact MF 200 series and the articulated 4000 series, competing directly with the big Ford and John Deere field tractors of the period. The turbocharged 2640 extended the range upward without enlarging the displacement.
On used examples of the second-generation 2000 series, turbocharger and injection-pump condition, transmission and shuttle shift, hydraulic output for heavy mounted implements and rust on cab and mudguards count; parts run through the AGCO network.
Sources: SpecCodex register, model data: Massey Ferguson 2000er-Baureihe, zweite Generation, Massey Ferguson (AGCO, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 120 hp (88.3 kW)correct |
| Rated speed | 2,400 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 5,797 cm³correct |
| Bore | 98.48 mmcorrect |
| Stroke | 127 mmcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,700 mmcorrect |
|---|---|
| Width | 2,300 mmcorrect |
| Height | 2,830 mmcorrect |
| Wheelbase | 2,726 mmcorrect |
| Ground clearance | 480 mmcorrect |
| Unladen weight | 5,390 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 16V/12Rcorrect |
| Forward gears | 16correct |
| Reverse gears | 12correct |
| Front tyres | 11.00-16 ASF (A: 13.6/12-28 AS)correct |
| Rear tyres | 18.4/15-38 AScorrect |
| Top speed | 30 km/hcorrect |
Working data
| Fuel tank capacity | 228 lcorrect |
|---|
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Other data
| Linkage category | Cat II/IIIcorrect |
|---|---|
| PTO speed | 540/1000 rpmcorrect |
Where this model stands
Power-to-weight ratio: 16.4 kW/t (88 kW / 5.4 t)
Power class: Large (100–180 hp)
Stronger than 74% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Massey Ferguson MF 2680 have?
The Massey Ferguson MF 2680 delivers 120 hp.
How much does the Massey Ferguson MF 2680 weigh?
The unladen weight is 5,390 kg.
What engine does the Massey Ferguson MF 2680 have?
6 cylinders, 5,797 cm³ displacement, Diesel.
How fast does the Massey Ferguson MF 2680 go?
Top speed is 30 km/h.
What are the dimensions of the Massey Ferguson MF 2680?
4,700 mm × 2,300 mm × 2,830 mm.
When was the Massey Ferguson MF 2680 built?
Production years: 1980–1985.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 26 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
