Manitou MTA 5519 – specifications
Series: MTA
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a telehandler, the Manitou MTA 5519 belongs to the MTA series. Engine output is 51.5 kW.
At 25 km/h, that is as fast as it goes.
Within the range, rated power spans from 51.5 to 89.5 kW; with 51.5 kW, the MTA 5519 sits at the bottom end. The next one up is the MTA 6034 with 55.2 kW.
Manitou MTA 6034: Deutz engine with 55.2 kW, hydrostatic transmission, 10,390 mm lift height and 2,750 kg lift capacity at 6,850 kg operating weight in the compact MTA telehandler series
Manitou is a French manufacturer based in Ancenis, among the world's leading makers of telehandlers. The MTA series stands for a more compact class of machine with hydrostatic transmission, built for agile handling rather than maximum lift height.
Read on 3 more paragraphs
The MTA 6034 is powered by a Deutz engine producing 55.2 kW and reaches a top speed of 32.5 km/h through its hydrostatic transmission. The machine stands 2,160 mm tall, weighs 6,850 kg and lifts a 2,750 kg load to a height of 10,390 mm.
The hydrostatic transmission allows stepless speed control without a clutch, an advantage for the frequent forward-and-back manoeuvring of yard work and for precise positioning of the load. This makes the machine well suited to barn work and manoeuvring in narrow passages, where a manual gearbox with a clutch would demand frequent gear changes. A rigid chassis with four-wheel steering is the norm for this type; the combination of moderate lift capacity and a lift height above 10 m places the MTA 6034 among yard loaders with extended reach.
When buying used, check the sealing of the drive pump and the wheel motors of the hydrostatic transmission, as well as the condition and sealing of the telescopic cylinders, which are heavily loaded at 10.39 m lift height. The Deutz engine is supported by a broad independent parts network, which eases upkeep of this model.
Sources: SpecCodex-Register: Kennwerte des Modells Manitou MTA 6034
Technical data
Engine
| Engine make | Yanmarcorrect |
|---|---|
| Power | 51.5 kWcorrect |
Dimensions and weights
| Height | 1,950 mmcorrect |
|---|
Drivetrain and chassis
| Gearbox type | hydrostatic transmissioncorrect |
|---|---|
| Top speed | 24.9 km/hcorrect |
Working data
| Lifting capacity | 2,500 kgcorrect |
|---|---|
| Lift height | 5,790 mmcorrect |
Frequently asked questions
How much power does the Manitou MTA 5519 have?
The Manitou MTA 5519 delivers 51.5 kW.
How fast does the Manitou MTA 5519 go?
Top speed is 24.9 km/h.
What is the load capacity of the Manitou MTA 5519?
Load capacity is 2,500 kg, lift height 5,790 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Telehandler in 3D section
Turn the model, look inside and click an assembly — each one is explained.
