Technical register for agricultural, construction and commercial machinery · sourced data
Start › Telehandlers › Manitou › MTA 6034

Manitou MTA 6034

Series: MTA

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Manitou MTA 6034 belongs to the MTA series. The engine delivers 55.2 kW. The engine comes from Deutz. The machine is 2,160 mm high. The unladen weight is 6,850 kg. Top speed is 32.5 km/h. Lifting capacity is 2,750 kg. Lift height is 10,390 mm. The MTA series covers 33 models. Rated output within it ranges from 51.5 to 89.5 kW; the MTA 6034 sits at the bottom of that range with 55.2 kW. Its immediate neighbours are the MTA 5519 below it with 51.5 kW and the MTA 10044 above it with 89.5 kW. Unladen weight within it ranges from 6,850 to 11,600 kg; here the MTA 6034 sits at the bottom of that range with 6,850 kg. 731 Manitou models across 35 series are on record.

Technical data

Engine

Engine makeDeutzcorrect
Power55.2 kWcorrect

Dimensions and weights

Height2,160 mmcorrect
Unladen weight6,850 kgcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmissioncorrect
Top speed32.5 km/hcorrect

Working data

Lifting capacity2,750 kgcorrect
Lift height10,390 mmcorrect

Where this model stands

Power-to-weight ratio: 8.1 kW/t (55 kW / 6.8 t)

Stronger than 11% of the telehandlers in the register — out of 661 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Manitou MTA 6034 have?

The Manitou MTA 6034 delivers 55.2 kW.

How much does the Manitou MTA 6034 weigh?

The unladen weight is 6,850 kg.

How fast does the Manitou MTA 6034 go?

Top speed is 32.5 km/h.

What is the load capacity of the Manitou MTA 6034?

Load capacity is 2,750 kg, lift height 10,390 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Telehandler in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare