MAN 8.150 BB/425
Built: 2006 · Series: 8.150
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
MAN 8.150 – 7.49/8-tonne class truck with a 150hp engine: six-cylinder from 4.58 to 6.87 litres, FAE 4X4 all-wheel-drive version, unladen weight 4.89 to 8 tonnes
The 8.150 follows the same MAN type logic: the 8 marks the weight class, the 150 the engine output of about 150hp, measured here at 110 to 114kW. The 7.49/395 version explicitly states the actual gross-weight class of that variant at 7.49 tonnes; F and FL denote forward-control cabs, FAE 4X4 the all-wheel-drive version. MAN was formed in 1908 from the merger of Maschinenfabrik Augsburg with the Nuremberg-based Maschinenbau-Actien-Gesellschaft; within the M90 generation the 8.150 formed the lightest weight class.
Read on 3 more paragraphs
The register lists 5 versions at 110 to 114kW, six-cylinder engines from 4,580 to 6,871cc displacement, unladen weights from 4,885 to 8,020kg, gross vehicle weights from 7,490 to 8,600kg, lengths from 5,800 to 8,800mm and widths from 2,300 to 2,450mm.
In the light 8-tonne class the 8.150 covered both urban distribution work with flatbed or box bodies and, in the 4X4 version, municipal and farm-adjacent off-road use. Trades businesses and municipalities valued the 8.150 for its tight turning circle in urban traffic, while the 4X4 version was used in winter road-service and forestry work.
Buying used, check the frame for rust, the condition of the clutch and gearbox, on the FAE 4X4 version the transfer case and axle drive, the brakes, and – depending on the engine fitted – the difference between the smaller 4.58-litre and the larger 6.87-litre unit; spare parts run through the MAN network. The tightness of the cab mounts and the condition of the tow hitch and body are also worth checking.
Sources: SpecCodex register, model data: MAN 8.150, MAN (manufacturer)
Technical data
Engine
| Power | 114 kWcorrect |
|---|---|
| Displacement | 4,580 cm³correct |
Dimensions and weights
| Length | 8,500 mmcorrect |
|---|---|
| Width | 2,300 mmcorrect |
| Unladen weight | 8,020 kgcorrect |
| Gross vehicle weight | 8,500 kgcorrect |
Where this model stands
Power-to-weight ratio: 14.2 kW/t (114 kW / 8 t)
Stronger than 10% of the trucks in the register — out of 25,241 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the MAN 8.150 BB/425 have?
The MAN 8.150 BB/425 delivers 114 kW.
How much does the MAN 8.150 BB/425 weigh?
The unladen weight is 8,020 kg.
What is the gross vehicle weight of the MAN 8.150 BB/425?
8,500 kg.
What engine does the MAN 8.150 BB/425 have?
4,580 cm³ displacement.
What are the dimensions of the MAN 8.150 BB/425?
8,500 mm × 2,300 mm.
When was the MAN 8.150 BB/425 built?
Production years: 2006.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.