MAN 4N2
Built: 1961–1963 · Series: N
More machines from model year 1961
MAN N – the two-cylinder agricultural diesels 2N1, 4N1 and 4N2 from Nuremberg: 1.7 to 2.0 litres displacement, 20 to 22 kW, 1,850 to 2,000 rpm
MAN, the commercial-vehicle and engine maker from Augsburg and Nuremberg, at whose Augsburg works Rudolf Diesel developed his first working diesel engine, also built a small range of agricultural diesel tractors in Nuremberg under the N designation. The types listed here, the 2N1, 4N1 and 4N2, are two-cylinder diesels and form the end of this sideline alongside MAN's actual core business of trucks and large engines.
Read on 3 more paragraphs
The register lists here 3 versions with 20.5 to 22 kW or 28 to 30 hp from the uniformly two-cylinder engine of 1,664 to 1,964 cm³ displacement at rated speeds of 1,850 to 2,000 rpm. Unladen weights lie between 1,600 and 1,950 kg, lengths between 3,110 and 3,130 mm, widths between 1,580 and 1,680 mm and heights between 1,500 and 1,810 mm.
In the segment of small two-cylinder farm tractors, MAN competed with specialist farm-equipment makers such as Deutz, Eicher and Hanomag, but could not hold its ground permanently with the agricultural diesel against the established tractor brands; MAN's core business remained commercial vehicles and industrial engines.
On a used example, the condition of the two-cylinder diesel and its injection pump, hydraulic tightness, wear of clutch and mechanical gearbox, and rust on mudguards and chassis after decades of use count; parts, given the low production numbers, are available mainly through specialist vintage-machinery dealers.
Sources: SpecCodex register, model data: MAN N, MAN (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 28 hp (20.5 kW)correct |
| Rated speed | 1,850 rpmcorrect |
| Cylinders | 2correct |
| Displacement | 1,664 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,110 mmcorrect |
|---|---|
| Width | 1,670 mmcorrect |
| Height | 1,500 mmcorrect |
| Wheelbase | 1,850 mmcorrect |
| Ground clearance | 400 mmcorrect |
| Unladen weight | 1,720 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 8/4-Getriebecorrect |
| Forward gears | 8correct |
| Reverse gears | 4correct |
| Front tyres | 6.50-20 AScorrect |
| Rear tyres | 10-28 AScorrect |
| Top speed | 19.9 km/hcorrect |
Working data
| Fuel tank capacity | 42 lcorrect |
|---|
Origin and approval
| Construction | semi-frame constructioncorrect |
|---|---|
| Units built | 1,100correct |
Other data
| Linkage category | Cat Icorrect |
|---|---|
| PTO speed | 540/1000 rpmcorrect |
Where this model stands
Power-to-weight ratio: 11.9 kW/t (20 kW / 1.7 t)
Power class: Compact (< 40 hp)
Stronger than 15% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the MAN 4N2 have?
The MAN 4N2 delivers 28 hp.
How much does the MAN 4N2 weigh?
The unladen weight is 1,720 kg.
What engine does the MAN 4N2 have?
2 cylinders, 1,664 cm³ displacement, Diesel.
How fast does the MAN 4N2 go?
Top speed is 19.9 km/h.
What are the dimensions of the MAN 4N2?
3,110 mm × 1,670 mm × 1,500 mm.
When was the MAN 4N2 built?
Production years: 1961–1963.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 26 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.