Lohr EUROLOHR E2
Built: 2007 · Series: EUROLOHR
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lohr Eurolohr – car-transporter semi-trailer from Hangenbieten with five versions, gross vehicle weights from 16,000 to 22,300 kg, lengths from 12,000 to 12,400 mm, kerb weights from 3,700 to 10,480 kg
Lohr Industrie, based in Hangenbieten near Strasbourg, builds one of Europe's best-known car-transporter semi-trailers in the Eurolohr. The register lists the range in five versions, from the base EUROLOHR through the EUROLOHR 17 and EUROLOHR 200 to the EUROLOHR 300 and EUROLOHR E2.
Read on 3 more paragraphs
The register lists five versions with kerb weights from 3,700 to 10,480 kg and gross vehicle weights from 16,000 to 22,300 kg. Lengths run from 12,000 to 12,400 mm, and the width is a uniform 2,550 mm.
The Eurolohr is a folding semi-trailer designed to carry several vehicles on two levels at once, used across Europe by vehicle logistics operators and hauliers for transporting new and used cars. The Eurolohr therefore also falls into EU trailer class O4, for trailers with a gross vehicle weight over 10 tonnes. Besides manufacturers and importers, independent vehicle logistics operators also count among Eurolohr users.
When buying used, a trailer of this type needs the ramp hydraulics and folding mechanism checking for correct operation, the load surfaces and tie-down points for condition, and the axles, brakes and lighting. Spare parts for the hydraulics and mechanism are supplied by Lohr through its own service network. Also important is the function of the lashing straps and safety chains, along with a complete set of ramp extensions.
Sources: SpecCodex register, model data: Lohr EUROLOHR, Lohr Industrie (manufacturer)
Technical data
Dimensions and weights
| Width | 2,550 mmcorrect |
|---|---|
| Wheelbase | 1,360 mmcorrect |
| Unladen weight | 8,440 kgcorrect |
| Gross vehicle weight | 19,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Lohr EUROLOHR E2 weigh?
The unladen weight is 8,440 kg.
What is the gross vehicle weight of the Lohr EUROLOHR E2?
19,000 kg.
Up to what speed is the Lohr EUROLOHR E2 approved?
Approved up to 100 km/h.
When was the Lohr EUROLOHR E2 built?
Production years: 2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
