Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Lindner › J 15

Lindner J 15

Built: 1949–1952 · Series: J

More machines from model year 1949

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Lindner J 15 is a model in the J series. Production: 1949–1952. The engine delivers 8 hp, has 1 cylinder, with a displacement of 1,506 cm³. Rated speed is 1,500 rpm. Top speed is 10 km/h. Transmission: 4V/1R. The engine is Verdampfer/Thermosiphon. The fuel is diesel. The PTO runs at 1500 rpm. Rated output across the Lindner range ranges from 8 to 116 hp; the J 15 sits at the bottom of that range with 8 hp. Its immediate neighbours are the Junior HRL 9 above it with 9 hp. 48 Lindner models across 18 series are on record.

Lindner J 15: early mountain tractor from Kundl in Tyrol, built between 1949 and 1952, single-cylinder diesel of 1,506 cm³ with evaporative thermosiphon cooling, 8 hp at 1,500 rpm

Lindner, based in Kundl in Tyrol, was among the manufacturers that built simple, rugged tractors for small mountain farms in the first post-war years, when materials were scarce and demand for engine-driven traction in the alpine valleys was high. The J 15 is one of the earliest models from that period and was in the range from 1949 to 1952.

Read on 3 more paragraphs

The single-cylinder diesel engine of 1,506 cm³ displacement uses evaporative thermosiphon cooling, meaning no water pump or fan, and produces 8 hp at 1,500 rpm. The gearbox offers four forward gears and one reverse, the PTO also turns at 1,500 rpm, and top speed is 10 km/h. The large displacement of 1,506 cm³ for just 8 hp shows how low-revving and gently this early single-cylinder unit was designed.

At just 10 km/h the J 15 clearly falls into licence class L. The simple cooling system with no moving parts was an advantage for small mountain holdings, as it needed little maintenance and was less prone to failure in rough terrain than a pumped water-cooling system, while the low PTO speed suited the slow-running, rugged implements of the period.

When buying such an early model, cooling is the main focus: thermosiphon systems without a circulation pump tend to develop air pockets and uneven cooling, which can show up as overheating marks on the cylinder head. The gearbox and clutch should also be checked for wear, the PTO bearing inspected, and it should be borne in mind that spare parts for this rare early model can now realistically only be found among collectors and vintage-tractor enthusiasts.

Sources: SpecCodex-Register: Kennwerte des Modells J 15

Technical data

Engine

Fueldieselcorrect
Power8 hpcorrect
Rated speed1,500 rpmcorrect
Cylinders1correct
Displacement1,506 cm³correct
CoolingVerdampfer/Thermosiphoncorrect

Drivetrain and chassis

Gearbox4V/1Rcorrect
Top speed10 km/hcorrect

Other data

PTO speed1,500 rpmcorrect

Frequently asked questions

How much power does the Lindner J 15 have?

The Lindner J 15 delivers 8 hp.

What engine does the Lindner J 15 have?

1 cylinders, 1,506 cm³ displacement, Diesel.

How fast does the Lindner J 15 go?

Top speed is 10 km/h.

When was the Lindner J 15 built?

Production years: 1949–1952.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare