Lindner Geotrac 60 N / A
Built: 1998–2001 · Series: Geotrac Serie - I
More machines from model year 1998
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lindner Geotrac Series I – tractors from Kundl in Tyrol, models from 50 to 100, three- and four-cylinder diesel engines, 2,700 to 4,000 cm³ displacement, 2,560 to 3,720 kg unladen weight
Lindner builds the first Geotrac series at its plant in Kundl in Tyrol; it comprises the Lindner 50 N/A and the Geotrac 60 N/A, 70 A, 80 A and 100 A, with three- or four-cylinder diesel engines. The type numbers from 50 to 100 order the models by power class, with N and A denoting different equipment variants. The family-owned Lindner company still manufactures at the same Kundl site today and has continuously developed the Geotrac range ever since.
Read on 3 more paragraphs
The register lists 5 versions from three- and four-cylinder engines of 2,700 to 4,000 cm³ displacement, unladen weights of 2,560 to 3,720 kg, lengths of 3,512 to 3,850 mm, widths of 1,770 to 2,090 mm, heights of 2,260 to 2,560 mm and a rated speed of 2,200 to 2,250 rpm.
The Geotrac range positions Lindner as an Austrian specialist in compact, versatile tractors for mountain farming, municipal services and smaller arable farms; Series I founded the Geotrac model family that continues to this day.
On used Series I Geotrac models, check the clutch and gearbox, the hydraulic pump and PTO, and rust on the cab and frame, which can be more pronounced from slope work and road salt in mountain use; also check the front axle joints and steering linkage for wear, with parts supplied through Lindner's dealer network in Austria and neighbouring countries.
Sources: SpecCodex register, model data: Lindner Geotrac Serie - I, Lindner (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Rated speed | 2,250 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 2,700 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,512 mmcorrect |
|---|---|
| Width | 1,790 mmcorrect |
| Height | 2,300 mmcorrect |
| Wheelbase | 2,004 mmcorrect |
| Unladen weight | 2,750 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 16V / 8Rcorrect |
| Front tyres | 9, 00-16 ( A: 10, 5-20 )correct |
| Rear tyres | 14, 9-28correct |
| Top speed | 35 km/hcorrect |
Frequently asked questions
How much does the Lindner Geotrac 60 N / A weigh?
The unladen weight is 2,750 kg.
What engine does the Lindner Geotrac 60 N / A have?
3 cylinders, 2,700 cm³ displacement, Diesel.
How fast does the Lindner Geotrac 60 N / A go?
Top speed is 35 km/h.
What are the dimensions of the Lindner Geotrac 60 N / A?
3,512 mm × 1,790 mm × 2,300 mm.
When was the Lindner Geotrac 60 N / A built?
Production years: 1998–2001.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
