Lindner 1065 N/A
Built: from 1982 · Series: 1000
More machines from model year 1982
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lindner 1000 – the 1065: a water-cooled four-cylinder diesel producing 48 kW with a 30 km/h top speed, from the Tyrolean tractor maker based in Kundl
Lindner is an Austrian tractor manufacturer based in Kundl in Tyrol, long specialised in tractors for mountain and grassland work, though it also built larger general-purpose tractors such as the 1065 of the 1000 series.
Read on 3 more paragraphs
The 1065 is fitted with a water-cooled four-cylinder diesel engine of 3,800 cm3 displacement, producing 48 kW, or 65 hp. The machine reaches a top speed of 30 km/h. No further dimensions or weight are recorded for this model in the register.
A four-cylinder engine of this displacement runs more smoothly than the smaller two- and three-cylinder models Lindner built for the steepest hillsides, and delivers more torque at lower engine speeds, making it better suited to mixed grassland, general yard work and haulage than to the very steepest, most extreme slopes those smaller models were built for. At a built-in top speed of 30 km/h, the machine stays well below the 60 km/h ceiling of the German T licence class.
When buying a used Lindner tractor built in the 1980s, often used on grassland and with slurry, it is worth checking the frame and rear axle for corrosion from slurry and moisture contact, the gearbox and differential for wear from frequent work on slopes, and the hydraulic hoses and clutch for wear from frequent starting and stopping on steep access tracks and yard ramps.
Sources: SpecCodex-Register: Kennwerte des Modells 1065
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 65 hp (48 kW)correct |
| Cylinders | 4correct |
| Displacement | 3,800 cm³correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Gearbox | ZF A212correct |
|---|---|
| Forward gears | 8correct |
| Reverse gears | 4correct |
| Front tyres | 325/70-18correct |
| Rear tyres | 14.9-28correct |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Other data
| PTO speed | 540/1000 rpmcorrect |
|---|
Frequently asked questions
How much power does the Lindner 1065 N/A have?
The Lindner 1065 N/A delivers 65 hp.
What engine does the Lindner 1065 N/A have?
4 cylinders, 3,800 cm³ displacement, Diesel.
How fast does the Lindner 1065 N/A go?
Top speed is 30 km/h.
When was the Lindner 1065 N/A built?
Production years: 1982–?.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.