Liebherr LMT 1095-5.1
Built: 2018 · Series: Other models
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Liebherr – other models: collective page of mobile cranes outside the named ranges, LG lattice-boom, compact LTC and telescopic LTM cranes, 205 to 440 kW
This page gathers Liebherr mobile cranes outside the named ranges – from the LG lattice-boom cranes through the compact LTC to the large LTM telescopic cranes. Liebherr, founded in 1949 by Hans Liebherr in Kirchdorf an der Iller in Upper Swabia and family-owned to this day, builds its mobile cranes at the Ehingen plant on the Danube. LTM stands for Liebherr-Teleskopmobilkran, LTC for the compact, manoeuvrable version with a shorter wheelbase, and LG for lattice-boom cranes on truck or crawler chassis; the following number roughly gives the maximum lifting capacity in tonnes, and the suffix after the hyphen the axle count and range generation.
Read on 3 more paragraphs
The register lists here 49 versions with outputs from 205 to 440 kW, displacements from 6,370 to 21,920 cm³ from six- to twelve-cylinders, operating weights from 23,750 to 95,750 kg against gross weights of 24,000 to 96,000 kg and widths from 2,500 to 3,000 mm.
Alongside Grove/Manitowoc and Tadano, Liebherr is one of the leading makers of mobile cranes and market leader in the German-speaking countries; the LTM range covers the whole spectrum from the compact two-axle crane to the large crane for wind-turbine and industrial assembly work.
On used examples, engine and crane-gear operating hours, the condition of the telescopic sections and cable drums, the tightness of the hydraulic cylinders, rust on the boom segments and, on the LG lattice cranes, the condition of the mast sections and pin joints all count; parts and service run through Liebherr's worldwide network.
Sources: SpecCodex register, model data: Liebherr (weitere Modelle), Liebherr (manufacturer)
Technical data
Engine
| Power | 400 kWcorrect |
|---|---|
| Cylinders | 6correct |
| Displacement | 11,946 cm³correct |
Dimensions and weights
| Length | 14,090 mmcorrect |
|---|---|
| Width | 2,750 mmcorrect |
| Unladen weight | 69,900 kgcorrect |
| Gross vehicle weight | 70,000 kgcorrect |
Where this model stands
Power-to-weight ratio: 5.7 kW/t (400 kW / 69.9 t)
Stronger than 91% of the trucks in the register — out of 25,242 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Liebherr LMT 1095-5.1 have?
The Liebherr LMT 1095-5.1 delivers 400 kW.
How much does the Liebherr LMT 1095-5.1 weigh?
The unladen weight is 69,900 kg.
What is the gross vehicle weight of the Liebherr LMT 1095-5.1?
70,000 kg.
What engine does the Liebherr LMT 1095-5.1 have?
6 cylinders, 11,946 cm³ displacement.
What are the dimensions of the Liebherr LMT 1095-5.1?
14,090 mm × 2,750 mm.
When was the Liebherr LMT 1095-5.1 built?
Production years: 2018.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
A53C
Kaksikerroksinen (CR) 2ov 10520cm3
LMTM 1095-5.1/UTM 759
LT 1025
LT1020
SF 12816 cm³ A
UTM525
UTM845
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
