Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Liebherr › Other models › SF 6370 cm³

Liebherr SF 6370 cm³ mobile crane

Built: 2006 · Series: Other models

More machines from model year 2006

Source: liebherr.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Liebherr SF 6370 cm³ Mobilkran is a vehicle built by Liebherr. Production: 2006. The engine delivers 205 kW, with a displacement of 6,370 cm³. The vehicle is 10,900 mm long and 2,500 mm wide. The unladen weight is 27,900 kg. The gross vehicle weight is 28,000 kg. Rated output across the Liebherr range ranges from 42.1 to 2,725 kW; the SF 6370 cm³ sits at the bottom of that range with 205 kW. Its immediate neighbours are the LH60M TIMBER LITRONIC below it with 202.8 kW and the LTM 1040-2.1 above it with 207 kW. Unladen weight across the Liebherr range ranges from 5,120 to 229,000 kg; here the SF 6370 cm³ sits at the bottom of that range with 27,900 kg. 518 Liebherr models across 45 series are on record.

Liebherr – other models: collective page of mobile cranes outside the named ranges, LG lattice-boom, compact LTC and telescopic LTM cranes, 205 to 440 kW

This page gathers Liebherr mobile cranes outside the named ranges – from the LG lattice-boom cranes through the compact LTC to the large LTM telescopic cranes. Liebherr, founded in 1949 by Hans Liebherr in Kirchdorf an der Iller in Upper Swabia and family-owned to this day, builds its mobile cranes at the Ehingen plant on the Danube. LTM stands for Liebherr-Teleskopmobilkran, LTC for the compact, manoeuvrable version with a shorter wheelbase, and LG for lattice-boom cranes on truck or crawler chassis; the following number roughly gives the maximum lifting capacity in tonnes, and the suffix after the hyphen the axle count and range generation.

Read on 3 more paragraphs

The register lists here 49 versions with outputs from 205 to 440 kW, displacements from 6,370 to 21,920 cm³ from six- to twelve-cylinders, operating weights from 23,750 to 95,750 kg against gross weights of 24,000 to 96,000 kg and widths from 2,500 to 3,000 mm.

Alongside Grove/Manitowoc and Tadano, Liebherr is one of the leading makers of mobile cranes and market leader in the German-speaking countries; the LTM range covers the whole spectrum from the compact two-axle crane to the large crane for wind-turbine and industrial assembly work.

On used examples, engine and crane-gear operating hours, the condition of the telescopic sections and cable drums, the tightness of the hydraulic cylinders, rust on the boom segments and, on the LG lattice cranes, the condition of the mast sections and pin joints all count; parts and service run through Liebherr's worldwide network.

Sources: SpecCodex register, model data: Liebherr (weitere Modelle), Liebherr (manufacturer)

Technical data

Engine

Power205 kWcorrect
Displacement6,370 cm³correct

Dimensions and weights

Length10,900 mmcorrect
Width2,500 mmcorrect
Unladen weight27,900 kgcorrect
Gross vehicle weight28,000 kgcorrect

Where this model stands

Power-to-weight ratio: 7.3 kW/t (205 kW / 27.9 t)

Stronger than 30% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Liebherr SF 6370 cm³ have?

The Liebherr SF 6370 cm³ delivers 205 kW.

How much does the Liebherr SF 6370 cm³ weigh?

The unladen weight is 27,900 kg.

What is the gross vehicle weight of the Liebherr SF 6370 cm³?

28,000 kg.

What engine does the Liebherr SF 6370 cm³ have?

6,370 cm³ displacement.

What are the dimensions of the Liebherr SF 6370 cm³?

10,900 mm × 2,500 mm.

When was the Liebherr SF 6370 cm³ built?

Production years: 2006.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare