Start › Tractors › Landini › Powermondial › Powermondial 110

Landini Powermondial 110

Series: Powermondial

Source: https://www.lectura-specs.com/en/model/agricultural-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Powermondial 110 from Landini is part of the Powermondial series. The engine delivers 91.8 hp (67.5 kW), has 4 cylinders, with a displacement of 4,400 cm³. The machine is 4,400 mm long, 2,056 mm wide and 2,720 mm high. The unladen weight is 4,650 kg. The wheelbase measures 2,400 mm. The tank holds 180 litres. Tyres: front 440/65R24, rear 540/65R34. The Powermondial series covers 3 models. Rated output within it ranges from 83.3 to 110.2 hp; the Powermondial 110 sits in the lower part of that range with 91.8 hp. Its immediate neighbours are the Powermondial 100 below it with 83.3 hp and the Powermondial 115 above it with 110.2 hp. Unladen weight within it ranges from 4,600 to 4,650 kg; here the Powermondial 110 sits at the top of that range with 4,650 kg. 222 Landini models across 35 series are on record.

Landini Powermondial – the export range 100, 110 and 115 with Perkins four-cylinder from Fabbrico: 4.4 litres displacement, 61 to 81 kW

Powermondial is Landini's mid-class built for export to markets outside the EU, as the Mondial suffix signals; the 100, 110 and 115 models carry the hp class in their name. They are powered by the 4.4-litre four-cylinder 1104D-44TA from the British engine maker Perkins, for decades one of the standard suppliers to Italian tractor builders.

Read on 4 more paragraphs

The register lists here 3 versions with 61 to 81 kW or 83.3 to 109 hp from the uniform four-cylinder of 4,400 cm³ displacement. Unladen weights lie between 4,600 and 4,650 kg, length is uniformly 4,400 mm, width between 1,964 and 2,056 mm and height between 2,720 and 2,730 mm.

As a sturdy, mechanically simple mid-class without the exhaust aftertreatment of the EU ranges, the Powermondial targets markets in eastern Europe, North Africa and overseas, where simple maintenance and low running costs count for more than complex electronics.

On a used example, the condition of the Perkins four-cylinder and its injection pump, hydraulic tightness, wear of clutch and gearbox, and rust on cab and mudguards count; parts run through the Landini-Argo network and Perkins engine service.

With outputs from 61 kW, the Powermondial range falls within three-point category II under ISO 730. Perkins still exists as an engine maker today under Caterpillar and continues to supply parts for the 1104D-44TA, independent of the specific Landini export market.

Sources: SpecCodex register, model data: Landini Powermondial, Landini

Technical data

Engine

Power	91.8 hp (67.5 kW)correct
Cylinders	4correct
Displacement	4,400 cm³correct

Dimensions and weights

Length	4,400 mmcorrect
Width	2,056 mmcorrect
Height	2,720 mmcorrect
Wheelbase	2,400 mmcorrect
Unladen weight	4,650 kgcorrect

Drivetrain and chassis

Front tyres	440/65R24correct
Rear tyres	540/65R34correct

Working data

Fuel tank capacity	180 lcorrect

Where this model stands

Power-to-weight ratio: 14.5 kW/t (68 kW / 4.7 t)

Power class: Universal (40–100 hp)

Stronger than 62% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Landini Powermondial 110 have?

The Landini Powermondial 110 delivers 91.8 hp.

How much does the Landini Powermondial 110 weigh?

The unladen weight is 4,650 kg.

What engine does the Landini Powermondial 110 have?

4 cylinders, 4,400 cm³ displacement.

What are the dimensions of the Landini Powermondial 110?

4,400 mm × 2,056 mm × 2,720 mm.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →