Landini Mistral 40 (26 kW)
Series: Mistral
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Landini Mistral 40 to 55 – the ARGO group's compact tractor for municipalities, horticulture and part-time farms: the number as hp class, Yanmar three- and four-cylinders of 1.6 to 2.2 litres, 1.3 to 1.4 m wide
The Mistral is Landini's entry into the compact class below 60 hp – the tractor for municipalities, nurseries, horse farms and part-time holdings that at 1.3 to 1.4 metres wide fits through yard gates and park paths and works with front loader, mower or snow blade. Landini of Fabbrico, part of the ARGO group since 1994, sources technology from partners in this class as all European makers do: the engines are Yanmar diesels from Japan – the three-cylinder 3TNV88 of 1.6 litres in the Mistral 40, the four-cylinders 4TNV84 and 4TNV88 of 2.0 and 2.2 litres in the larger models, turbocharged in the Mistral 55. The type logic: the number gives the hp class – Mistral 40 about 40 hp, 45 45 hp, 50 50 hp, 55 about 55 hp – the versions differ in transmission (mechanical or hydrostatic) and equipment.
Read on 3 more paragraphs
The register lists 8 versions with 26 to 40.3 kW from three- and four-cylinders of 1,639 to 2,189 cm³, PTO outputs from 32 to 50 hp, unladen weights from 1,447 to 1,480 kg, lengths from 3,300 to 3,360 mm, widths from 1,295 to 1,395 mm and heights from 1,900 to 1,960 mm.
The Mistral competes with Kubota, Iseki, John Deere 3 series and New Holland Boomer; its argument is the Landini dealer network in Italy, France and Eastern Europe that carries the compact tractor alongside the big ranges.
On used tractors, operating hours, Yanmar engine (compression, injection), hydrostat or clutch, four-wheel-drive clutch, loader hydraulics and PTO, tyres count; parts run through ARGO and Yanmar specialists.
Sources: SpecCodex register, model data: Landini Mistral, Landini (ARGO Tractors, Hersteller)
Technical data
Engine
| Engine make | Yanmarcorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 35.5 hp (26 kW)correct |
| Cylinders | 3correct |
| Displacement | 1,642 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,300 mmcorrect |
|---|---|
| Width | 1,295 mmcorrect |
| Height | 1,900 mmcorrect |
| Wheelbase | 1,700 mmcorrect |
| Unladen weight | 1,450 kgcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|---|
| Rear tyres | 320/70R20correct |
| Top speed | 30 km/hcorrect |
Working data
| Fuel tank capacity | 40 lcorrect |
|---|
Origin and approval
| Plant | Italycorrect |
|---|
Where this model stands
Power-to-weight ratio: 17.9 kW/t (26 kW / 1.4 t)
Power class: Compact (< 40 hp)
Stronger than 21% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Landini Mistral 40 have?
The Landini Mistral 40 delivers 35.5 hp.
How much does the Landini Mistral 40 weigh?
The unladen weight is 1,450 kg.
What engine does the Landini Mistral 40 have?
3 cylinders, 1,642 cm³ displacement, Diesel.
How fast does the Landini Mistral 40 go?
Top speed is 30 km/h.
What are the dimensions of the Landini Mistral 40?
3,300 mm × 1,295 mm × 1,900 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.