Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Landini › 800 series › 9800 (DT)

Landini 9800 (DT)

Built: 1987–2000 · Series: 800 er-Baureihe

More machines from model year 1987

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 9800 (DT) from Landini is part of the 800er series. Production: 1987–2000. The engine delivers 90 hp (66.2 kW), has 4 cylinders, with a displacement of 3,861 cm³. Torque is 328 Nm. Rated speed is 2,200 rpm. The machine is 4,220 mm long, 2,080 mm wide and 2,760 mm high. The unladen weight is 4,080 kg. The wheelbase measures 2,460 mm. Ground clearance is 407 mm. Top speed is 30 km/h. Transmission: 32 V/32 R. The engine is water-cooled. Tyres: front 10.00-16 ASF (A: 13.6 R 28 AS), rear 16.9 R 38 AS. The fuel is diesel. The bore measures 98.42 mm. The stroke is 127 mm. Maximum torque is reached at 1,300 rpm. Construction: unit construction (no separate frame). The 800 er-Baureihe series covers 6 models. Rated output within it ranges from 68 to 107 hp; the 9800 (DT) sits in the middle of that range with 90 hp. Its immediate neighbours are the 7800-Turbo (DT) below it with 84 hp and the 10800 (DT) above it with 97 hp. Unladen weight within it ranges from 3,705 to 4,390 kg; here the 9800 (DT) sits in the middle of that range with 4,080 kg. 222 Landini models across 35 series are on record.

Landini 800 Series - four-wheel-drive tractors 7800 to 11800 (DT) from the oldest Italian tractor maker: four- and six-cylinder engines of 3.9 to 5.8 litres, 50 to 79 kW

Landini, founded in 1884 by Giovanni Landini in Fabbrico in Emilia, is one of the oldest tractor makers in the world and runs the 800 series as its four-wheel-drive programme: all six models listed here carry the DT designation for Doppia Trazione. The four-digit type designation orders the power class ascending from the 7800 to the 11800, while the Turbo suffix on the 7800 denotes the turbocharged version of the base model.

Read on 3 more paragraphs

The register lists 6 versions with 50 to 78.8 kW from four- and six-cylinder engines of 3,861 to 5,795 cm³, torque of 247 to 350 Nm at around 2,200 rpm, kerb weights of 3,705 to 4,390 kg, lengths of 3,950 to 4,450 mm, widths of 1,990 to 2,130 mm and heights of 2,620 to 2,810 mm; every model runs on diesel.

Within Landini's range, the 800 series covered the mid-to-upper power segment for arable and mixed farms, with four-wheel drive as a consistent standard for pulling power on heavy ground and sloping terrain. Landini today belongs to the ARGO Tractors group and shares platforms with its sister marque McCormick.

On a used example of these four- and six-cylinder diesels, check the injection pump and turbocharger (on the Turbo version), the clutch and transmission, the front-axle gearbox and drive shafts of the four-wheel-drive system, the hydraulic pump and valves, and corrosion on the wings and bonnet; parts run through the ARGO Tractors trade network.

Sources: SpecCodex register, model data: Landini 800er-Baureihe, Landini (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power90 hp (66.2 kW)correct
Rated speed2,200 rpmcorrect
Torque328 Nmcorrect
Speed at max. torque1,300 rpmcorrect
Cylinders4correct
Displacement3,861 cm³correct
Bore98.42 mmcorrect
Stroke127 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length4,220 mmcorrect
Width2,080 mmcorrect
Height2,760 mmcorrect
Wheelbase2,460 mmcorrect
Ground clearance407 mmcorrect
Unladen weight4,080 kgcorrect

Drivetrain and chassis

Driverear- or four-wheel drivecorrect
Gearbox32 V/32 Rcorrect
Front tyres10.00-16 ASF (A: 13.6 R 28 AS)correct
Rear tyres16.9 R 38 AScorrect
Top speed30 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct

Where this model stands

Power-to-weight ratio: 16.2 kW/t (66 kW / 4.1 t)

Power class: Universal (40–100 hp)

Stronger than 61% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Landini 9800 (DT) have?

The Landini 9800 (DT) delivers 90 hp.

How much does the Landini 9800 (DT) weigh?

The unladen weight is 4,080 kg.

What engine does the Landini 9800 (DT) have?

4 cylinders, 3,861 cm³ displacement, Diesel.

How fast does the Landini 9800 (DT) go?

Top speed is 30 km/h.

What are the dimensions of the Landini 9800 (DT)?

4,220 mm × 2,080 mm × 2,760 mm.

When was the Landini 9800 (DT) built?

Production years: 1987–2000.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare