Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Land Rover › Vans up to 3.5 t (Class N1) › 3D DISCOVERY-LJGB7-4X4/254

Land Rover 3D DISCOVERY-LJGB7-4X4/254

Built: 1996 · Series: Vans up to 3.5 t (Class N1)

More machines from model year 1996

Source: landrover.nl

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Land Rover 3D DISCOVERY-LJGB7-4X4/254 is a model in the Vans up to 3.5 t (Class N1) series. Production: 1996. The engine delivers 90 kW, with a displacement of 2,490 cm³. The vehicle is 4,450 mm long and 1,790 mm wide. The unladen weight is 1,950 kg. The gross vehicle weight is 2,810 kg. The gearbox offers 5 gears. The Vans up to 3.5 t (Class N1) series covers 422 models. Rated output within it ranges from 38 to 155 kW; the 3D DISCOVERY-LJGB7-4X4/254 sits in the middle of that range with 90 kW. Its immediate neighbours are the 110-LDHHC8-3.05 T-PICK UP-4X4 below it with 85 kW and the STATION WAGON above it with 96 kW. Unladen weight within it ranges from 1,400 to 2,569 kg; here the 3D DISCOVERY-LJGB7-4X4/254 sits in the middle of that range with 1,950 kg. 782 Land Rover models across 14 series are on record.

Land Rover vans and trucks up to 3.5 t (class N1) – collective page for the EU light-van class: the 109-inch wheelbase as the type logic of the Series I to III, Forward Control pick-ups and early Defender predecessors

The EU vehicle class N1 covers light commercial vehicles up to 3.5 t gross vehicle weight; this page is a collective page built from registration data (Netherlands, Finland) bundling every Land Rover range recorded in that class. Land Rover was introduced in 1948 as an off-road utility vehicle by the Rover Company in Solihull, England, and today belongs to Jaguar Land Rover (owned by Tata Motors since 2008). The type logic of the model list is the classic Land Rover one: the number 109 denotes the wheelbase in inches (short 88, long 109) of the Series I to III (1948–1985), "FC" stands for Forward Control with a cab moved forward for higher payload, plus special bodies such as ambulance and pick-up versions. From the 1990s the range was continued under the name Defender.

Read on 3 more paragraphs

The register lists 422 versions, with recorded outputs of 38 to 155 kW, displacements of 1,595 to 6,750 cm³ across 4 to 8 cylinders, kerb weights of 1,150 to 3,280 kg and gross vehicle weights of 1,480 to 3,500 kg; width ranges from 1,530 to 2,540 mm, length from 3,500 to 5,200 mm.

As an off-road vehicle with a high payload, Land Rover occupies a niche in this class between a classic passenger estate and a light truck, with a correspondingly broad engine range from four-cylinder diesels to V8 petrol units.

On a used example, what matters on the ladder-frame models is corrosion on the frame and the aluminium body panels (galvanic corrosion where they meet the steel frame), the condition of the transfer case and differentials, and on the older engines compression values and oil consumption. Spare parts for the Series and early Defender models are well supplied through an active specialist market.

Sources: SpecCodex register, model data: Land Rover Transporter bis 3,5 t (Klasse N1), Land Rover (Jaguar Land Rover, Hersteller)

Technical data

Engine

Power90 kWcorrect
Displacement2,490 cm³correct

Dimensions and weights

Length4,450 mmcorrect
Width1,790 mmcorrect
Unladen weight1,950 kgcorrect
Gross vehicle weight2,810 kgcorrect

Drivetrain and chassis

Gears5correct

Where this model stands

Power-to-weight ratio: 46.2 kW/t (90 kW / 1.9 t)

Stronger than 55% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Land Rover 3D DISCOVERY-LJGB7-4X4/254 have?

The Land Rover 3D DISCOVERY-LJGB7-4X4/254 delivers 90 kW.

How much does the Land Rover 3D DISCOVERY-LJGB7-4X4/254 weigh?

The unladen weight is 1,950 kg.

What is the gross vehicle weight of the Land Rover 3D DISCOVERY-LJGB7-4X4/254?

2,810 kg.

What engine does the Land Rover 3D DISCOVERY-LJGB7-4X4/254 have?

2,490 cm³ displacement.

What are the dimensions of the Land Rover 3D DISCOVERY-LJGB7-4X4/254?

4,450 mm × 1,790 mm.

When was the Land Rover 3D DISCOVERY-LJGB7-4X4/254 built?

Production years: 1996.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare