Lamborghini R-360 (DT)
Built: 1970–1973 · Series: Zweite R-Baureihe
More machines from model year 1970
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lamborghini R series: compact agricultural tractors from Cento/Pieve di Cento, from the R-240 (DT) to the R-360 (DT), 28.7 to 39 kW from two- and three-cylinder diesel engines
Lamborghini Trattori was founded in 1948 by Ferruccio Lamborghini in Cento and has been part of the SAME group since 1972, which builds the tractors at the Pieve di Cento plant. This page collects a further R series from the marque, from the R-240 (DT) to the R-360 (DT); the leading number gives the approximate size class, and DT in Italian tractor typology stands for Doppia Trazione, meaning four-wheel drive.
Read on 3 more paragraphs
The register lists 2 versions from 28.7 to 39 kW from two- and three-cylinder diesel engines of 1,885 to 2,827 cm³ displacement at 2,200 to 2,400 rpm. Kerb weights range from 1,700 to 1,900 kg, lengths from 2,860 to 2,990 mm, widths from 1,650 to 1,690 mm and heights from 1,260 to 1,290 mm.
Tractors of this power and weight class cover the small and compact segment at Lamborghini, suited to smaller farms, special crops and yard work; the low build height eases use under trees and inside greenhouses, while the two- and three-cylinder engines keep fuel consumption modest for light tillage and yard transport.
When buying a used example, check operating hours and the service history of engine and injection pump, the condition of clutch, gearbox and four-wheel drive, the tightness of the hydraulics, and corrosion on sheet-metal parts and wings; since the engineering is largely shared with Same and Deutz-Fahr, spare-parts supply through the SDF dealer network is comparatively good.
Sources: SpecCodex register, model data: Lamborghini R-Baureihe, Lamborghini Trattori (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 53 hp (39 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 2,827 cm³correct |
| Bore | 100 mmcorrect |
| Stroke | 120 mmcorrect |
| Injection pressure | 180 barcorrect |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 2,990 mmcorrect |
|---|---|
| Width | 1,690 mmcorrect |
| Height | 1,290 mmcorrect |
| Wheelbase | 1,920 mmcorrect |
| Unladen weight | 1,900 kgcorrect |
Drivetrain and chassis
| Drive | rear- and four-wheel drivecorrect |
|---|---|
| Gearbox | 12 V/3 Rcorrect |
| Front tyres | 6.00-16 ASF (DT: 8.00-20 AS)correct |
| Rear tyres | 13.6-28 AScorrect |
| Top speed | 25 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|---|
| Units built | 482 (DT: 337)correct |
Where this model stands
Power-to-weight ratio: 20.5 kW/t (39 kW / 1.9 t)
Power class: Universal (40–100 hp)
Stronger than 37% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Lamborghini R-360 (DT) have?
The Lamborghini R-360 (DT) delivers 53 hp.
How much does the Lamborghini R-360 (DT) weigh?
The unladen weight is 1,900 kg.
What engine does the Lamborghini R-360 (DT) have?
3 cylinders, 2,827 cm³ displacement, Diesel.
How fast does the Lamborghini R-360 (DT) go?
Top speed is 25 km/h.
What are the dimensions of the Lamborghini R-360 (DT)?
2,990 mm × 1,690 mm × 1,290 mm.
When was the Lamborghini R-360 (DT) built?
Production years: 1970–1973.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
