Lamborghini / Slh 350 DT
Built: 1992–2003 · Series: Runner-Baureihe
More machines from model year 1992
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lamborghini Runner range – compact four-wheel-drive tractors from Pieve di Cento: the 250 DT, 350 DT and 450 DT with three- and four-cylinder diesels, 18.4 to 33.1 kW, 970 to 1,150 kg unladen weight
The Runner range from Lamborghini Trattori of Pieve di Cento formed a compact model line with the 250, 350 and 450 types, each in DT form with the brand's standard four-wheel drive, Doppia Trazione. The range combined three- and four-cylinder diesels in a light, manoeuvrable build for smaller farms and specialist crops, where a narrow track and a tight turning circle mattered as much as raw pulling power.
Read on 3 more paragraphs
The register lists here 3 versions with 18.4 to 33.1 kW output at a uniform 3,000 rpm, from three- to four-cylinder diesels of 1,118 to 1,490 cm³ and maximum torque of 59.8 to 100.2 Nm. Unladen weights range from 970 to 1,150 kg, lengths from 2,690 to 3,030 mm, widths from 1,020 to 1,260 mm and heights from 1,960 to 2,030 mm; all three models run on diesel.
With their low weight and standard four-wheel drive, the Runner range targeted smaller fields, fruit and vine growing and municipal grounds work, where manoeuvrability and sure traction in confined space mattered more than high engine power.
On a used purchase of these small four-wheel-drive tractors, the condition of the front axle and its joints counts, the clutch and gearbox, the tightness of injection pump and cooling system, and rust on mudguards, bonnet and sheet-metal parts; parts run through the SAME Deutz-Fahr network.
Sources: SpecCodex register, model data: Lamborghini Runner-Baureihe, Lamborghini Trattori (SAME Deutz-Fahr, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 35 hp (25.7 kW)correct |
| Rated speed | 3,000 rpmcorrect |
| Torque | 84.9 Nmcorrect |
| Speed at max. torque | 2,060 rpmcorrect |
| Cylinders | 3correct |
| Bore | 78 mmcorrect |
| Stroke | 78 mmcorrect |
| Compression ratio | 18correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 2,690 mmcorrect |
|---|---|
| Width | 1,020 mmcorrect |
| Height | 1,990 mmcorrect |
| Wheelbase | 1,630 mmcorrect |
| Ground clearance | 345 mmcorrect |
| Unladen weight | 1,110 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 12 V/12 Rcorrect |
| Front tyres | 6.50-16 AScorrect |
| Rear tyres | 11.2 R 24 AScorrect |
| Top speed | 25 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 23.2 kW/t (26 kW / 1.1 t)
Power class: Compact (< 40 hp)
Stronger than 21% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Lamborghini / Slh 350 DT have?
The Lamborghini / Slh 350 DT delivers 35 hp.
How much does the Lamborghini / Slh 350 DT weigh?
The unladen weight is 1,110 kg.
What engine does the Lamborghini / Slh 350 DT have?
3 cylinders, Diesel.
How fast does the Lamborghini / Slh 350 DT go?
Top speed is 25 km/h.
What are the dimensions of the Lamborghini / Slh 350 DT?
2,690 mm × 1,020 mm × 1,990 mm.
When was the Lamborghini / Slh 350 DT built?
Production years: 1992–2003.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.