Lamborghini / Slh 554-50 (DT)
Built: 1993–2004 · Series: CRONO-Baureihe
More machines from model year 1993
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lamborghini Crono range – three-cylinder tractors with a power figure in the name: the 554-50, 564-60 and 574-70 (DT) from Pieve di Cento, 36.8 to 51.5 kW, each with four-wheel drive
Lamborghini Trattori, founded in 1948 by Ferruccio Lamborghini and part of the SAME group since 1972, also built the Crono range in Pieve di Cento in Emilia-Romagna. The type code follows a fixed pattern: the first three digits give the model series, the number after the hyphen the engine power in horsepower – the 554-50 with 50 hp, the 564-60 with 60 hp and the 574-70 with 70 hp – while the DT suffix stands for Doppia Trazione, the four-wheel drive fitted to all three models in this range.
Read on 3 more paragraphs
The register lists here 3 versions with 36.8 to 51.5 kW output at a uniform 2,350 rpm, from three-cylinder diesels of a uniform 3,000 cm³ and maximum torque of 168 to 241 Nm. Unladen weights range from 1,940 to 2,140 kg, lengths from 3,085 to 3,270 mm, widths from 1,640 to 1,780 mm and heights from 2,245 to 2,345 mm; all three models run on diesel.
The Crono range covered the 50 to 70 hp power segment, where Lamborghini competed against its own group sister SAME as well as Fiat, Deutz-Fahr and Renault; the standard four-wheel drive made the models particularly attractive on slopes and for heavier soil work.
On a used purchase of these three-cylinder diesels with four-wheel drive, the condition of the front axle with its transfer gearbox and drive shafts counts, the clutch and gearbox, the tightness of injection pump and cooling system, and rust on mudguards and cab; parts run through the SAME Deutz-Fahr network.
Sources: SpecCodex register, model data: Lamborghini Crono-Baureihe, Lamborghini Trattori (SAME Deutz-Fahr, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 50 hp (36.8 kW)correct |
| Rated speed | 2,350 rpmcorrect |
| Torque | 168 Nmcorrect |
| Speed at max. torque | 1,305 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 3,000 cm³correct |
| Bore | 105 mmcorrect |
| Stroke | 115.5 mmcorrect |
| Compression ratio | 17correct |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 3,085 mmcorrect |
|---|---|
| Width | 1,640 mmcorrect |
| Height | 2,245 mmcorrect |
| Wheelbase | 1,975 mmcorrect |
| Ground clearance | 390 mmcorrect |
| Unladen weight | 1,940 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 12 V/12 R, 16 V/8 R and 24 V/12 Rcorrect |
| Front tyres | 5.50-16 ASF (DT: 11.2 R 20 AS)correct |
| Rear tyres | 380/70 R 28 AS (DT: 14.9 R 28 AS)correct |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 19 kW/t (37 kW / 1.9 t)
Power class: Universal (40–100 hp)
Stronger than 34% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Lamborghini / Slh 554-50 (DT) have?
The Lamborghini / Slh 554-50 (DT) delivers 50 hp.
How much does the Lamborghini / Slh 554-50 (DT) weigh?
The unladen weight is 1,940 kg.
What engine does the Lamborghini / Slh 554-50 (DT) have?
3 cylinders, 3,000 cm³ displacement, Diesel.
How fast does the Lamborghini / Slh 554-50 (DT) go?
Top speed is 30 km/h.
What are the dimensions of the Lamborghini / Slh 554-50 (DT)?
3,085 mm × 1,640 mm × 2,245 mm.
When was the Lamborghini / Slh 554-50 (DT) built?
Production years: 1993–2004.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
