Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Lamborghini › R2.60

Lamborghini R2.60

Series: R2

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Lamborghini R2.60 is a model in the R2 series. The engine delivers 62 hp (46 kW), has 3 cylinders, with a displacement of 3,000 cm³. Rated speed is 2,200 rpm. The machine is 3,570 mm long and 1,940 mm wide. The unladen weight is 3,000 kg. The wheelbase measures 2,100 mm. Ground clearance is 360 mm. Top speed is 40 km/h. The tank holds 90 litres. Transmission: mechanisch / powershift transmission. The engine is Flüssigkeits-/Ölkühlung. Tyres: rear 420/70R30. The fuel is Dieselkraftstoff. The R2 series covers 5 models. Rated output within it ranges from 55 to 95 hp; the R2.60 sits in the lower part of that range with 62 hp. Its immediate neighbours are the R2.56 below it with 55 hp and the R2.66 above it with 70 hp. Unladen weight within it ranges from 2,400 to 3,200 kg; here the R2.60 sits in the upper part of that range with 3,000 kg. 136 Lamborghini models across 28 series are on record.

Lamborghini R2.56 to R2.100 – the compact R2 range from Pieve di Cento: the number after the dot follows the horsepower class, a shared 3.0-litre three-cylinder, 41 to 70 kW, with or without a cab

The R2 range is a compact line of Lamborghini Trattori models whose type logic follows Italian convention: the number after the dot in designations from R2.56 to R2.100 roughly gives the horsepower class, directly reflected in the register's values of 55 to 95 hp. All five models share the same 3.0-litre three-cylinder diesel engine, tuned differently model to model – a standard solution with which Lamborghini, as part of the SAME Deutz-Fahr group, pools development cost across an entire power class. The tractors were offered with either an open platform or an enclosed cab, visible in the register through the differing weight and height figures per version.

Read on 3 more paragraphs

The register lists 5 versions with an engine of 3,000 cm³, outputs of 40.5 to 70 kW, operating weights of 2,400 to 3,410 kg depending on cab version, lengths of 3,405 to 3,700 mm and heights of 2,375 to 2,460 mm at 2,200 rpm.

The R2 range was conceived as a versatile farmyard and field tractor for small and medium-sized farms, in a power class where it competed directly with the comparable ranges of its group siblings Deutz-Fahr and Same.

On used tractors, the condition of clutch and gearbox, leak-free hydraulics, on the cab version the condition of seals and glass, and rust on the wings count; parts supply runs through the SAME Deutz-Fahr dealer network.

Sources: SpecCodex register, model data: Lamborghini R2, Lamborghini Trattori (manufacturer)

Technical data

Engine

FuelDieselkraftstoffcorrect
Power62 hp (46 kW)correct
Rated speed2,200 rpmcorrect
Cylinders3correct
Displacement3,000 cm³correct
CoolingFlüssigkeits-/Ölkühlungcorrect

Dimensions and weights

Length3,570 mmcorrect
Width1,940 mmcorrect
Wheelbase2,100 mmcorrect
Ground clearance360 mmcorrect
Unladen weight3,000 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearboxmechanisch / powershift transmissioncorrect
Rear tyres420/70R30correct
Top speed40 km/hcorrect

Working data

Fuel tank capacity90 lcorrect

Where this model stands

Power-to-weight ratio: 15.3 kW/t (46 kW / 3 t)

Power class: Universal (40–100 hp)

Stronger than 44% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Lamborghini R2.60 have?

The Lamborghini R2.60 delivers 62 hp.

How much does the Lamborghini R2.60 weigh?

The unladen weight is 3,000 kg.

What engine does the Lamborghini R2.60 have?

3 cylinders, 3,000 cm³ displacement, Dieselkraftstoff.

How fast does the Lamborghini R2.60 go?

Top speed is 40 km/h.

What are the dimensions of the Lamborghini R2.60?

3,570 mm × 1,940 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare