Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Lafert › AMHEBZ › AMHEBZ 112M AA

Lafert AMHEBZ 112M AA

Series: AMHEBZ

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Lafert AMHEBZ 112M AA is a three-phase induction motor from the AMHEBZ series. The rated output is 4 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The housing is frame size 112 M in foot-mounted form. The protection class is IP55. The efficiency is 88.6 per cent at full load, 88.6 per cent at 75 per cent load and 87.1 per cent at half load. Mounting arrangements to IEC 60034-7: B3, B5 and B14A. The motor is built in Italy. The figures come from the Australian MEPS register under the GEMS Determination 2012; measured to IEC 60034-2-1 (Edition 2.0). The AMHEBZ series covers 12 models. Rated output within it ranges from 0.75 to 15 kW; the AMHEBZ 112M AA sits in the lower part of that range with 4 kW. Its immediate neighbours are the AMHEBZ 100L BA4 below it with 3 kW and the AMHEBZ 132S RA4 above it with 5.5 kW. 97 Lafert models across 5 series are on record.

Lafert AMHEBZ – three-phase motors made in Italy: frame sizes 80 to 160, 0.75 to 15 kW, four-pole throughout, supply voltages from 230/400 to 400/690 V, efficiency 80.3 to 91.3%

The AMHEBZ range is listed in the register under the name of the Italian manufacturer Lafert, unlike the AMHE models from the same factory, which are registered under the licensed AEG brand. Lafert is an Italian maker of industrial motors headquartered in the Veneto region and supplies both its own brand and licensees such as AEG. The AMHEBZ frame sizes from 80 to 160 follow the same IEC scheme as the sister AEG range.

Read on 3 more paragraphs

The register lists 12 versions with 0.75 to 15 kW rated output, four-pole throughout, at supply voltages from 230/400 V to 400/690 V. Full-load efficiency ranges from 80.27 to 91.28%, and at 75% load from 80.42 to 91.46%. The protection class is mostly IP55, with frame sizes from 80 to 160.

Registration under two different GEMS determinations, the 2012 and the 2019 versions, and under two different test methods shows that the range was certified for the Australian and New Zealand market gradually over several years. As a purely four-pole motor, the AMHEBZ range is designed for the widely used standard speed range around 1,500 revolutions per minute.

For a replacement or used purchase, these motors call for matching the respective supply voltage to the local mains, checking the condition of the terminal-box wiring, and the seal of the IP55 protection class. The predominant B3,B5,B14,B34,B35 mounting code allows both foot and flange mounting, which makes replacement with other frame sizes in the same range easier.

Sources: SpecCodex register, model data: Lafert AMHEBZ, Lafert (manufacturer), Zulassungsdaten GEMS/MEPS (Australien, Neuseeland)

Technical data

Engine

Rated output4 kWcorrect

Electrical data

Rated voltage400/690 Vcorrect
Number of poles4correct
Protection class55correct
Frame size112 M (foot)correct
Mounting (IEC 60034-7)B3, B5, B14Acorrect
Efficiency at full load88.59 %correct
Efficiency at 75 % load88.64 %correct
Efficiency at half load87.1 %correct

Origin and approval

Country of manufactureItalycorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Lafert AMHEBZ 112M AA have?

The Lafert AMHEBZ 112M AA delivers 4 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare