Kubota M7151
Built: 2014 · Series: M7001
More machines from model year 2014
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kubota M7151 (M7001 series), built in 2014: four-cylinder diesel with 6.1 litres of displacement and 110 kW for heavy tillage
The M7151, built in 2014, belongs to the M7 series, with which Kubota entered the class of large standard tractors above 100 kW, a power range that Japanese manufacturers had rarely occupied until then.
Read on 3 more paragraphs
The M7151 is powered by a water-cooled four-cylinder diesel engine of 6,124 cm³ displacement, delivering 110 kW, or 150 hp, at 2,200 rpm. At a kerb weight of 6,500 kg, the tractor is 4,770 mm long, 2,500 mm wide and 3,030 mm high, with a wheelbase of 2,720 mm. Its design top speed is 50 km/h.
At 50 km/h, the M7151 falls into driving licence category T. The low rated speed of 2,200 rpm combined with over six litres of displacement across four cylinders points to a torque-oriented design, as needed for heavy soil cultivation and operating large towed implements. The permitted top speed of 50 km/h also allows for brisker road transport.
When buying a large four-cylinder tractor of this power class, the checklist should include the clutch for wear from frequent operation of heavy implements, the hydraulic pump for adequate delivery, and the condition of the PTO drive shafts. Given the 6.5-tonne weight, the tyres also deserve particular attention for even wear and adequate pressure, since underinflated tyres on a tractor this heavy wear unevenly and increase fuel consumption. The rear axle seals should likewise be checked for oil seepage, a common sign of age on tractors that have pulled heavy implements for years.
Sources: SpecCodex-Register: Kennwerte des Modells Kubota M7151, Kubota (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 150 hp (110 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 6,124 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,770 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Height | 3,030 mmcorrect |
| Wheelbase | 2,720 mmcorrect |
| Unladen weight | 6,500 kgcorrect |
Drivetrain and chassis
| Forward gears | 24correct |
|---|---|
| Front tyres | 540/65R28correct |
| Rear tyres | 650/65R38correct |
| Top speed | 50 km/hcorrect |
Where this model stands
Power-to-weight ratio: 16.9 kW/t (110 kW / 6.5 t)
Power class: Large (100–180 hp)
Stronger than 83% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Kubota M7151 have?
The Kubota M7151 delivers 150 hp.
How much does the Kubota M7151 weigh?
The unladen weight is 6,500 kg.
What engine does the Kubota M7151 have?
4 cylinders, 6,124 cm³ displacement, Diesel.
How fast does the Kubota M7151 go?
Top speed is 50 km/h.
What are the dimensions of the Kubota M7151?
4,770 mm × 2,500 mm × 3,030 mm.
When was the Kubota M7151 built?
Production years: 2014.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.