Kubota M5101N
Built: 2017 · Series: M5001N
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kubota M5101N (M5001N series), built in 2017: narrow-track four-cylinder diesel with 77 kW for orchard and vineyard row work
The M5101N, built in 2017, belongs to Kubota's M5001 range but, at only 1,250 mm wide, is markedly narrower than the standard versions of this size class.
Read on 3 more paragraphs
The M5101N is powered by a water-cooled four-cylinder diesel engine of 3,769 cm³ displacement, delivering 77 kW, or 105 hp, at 2,600 rpm. Cab height is 2,360 mm, weight with cab is 2,650 kg, length is 3,950 mm and the wheelbase is 2,130 mm. Its design top speed is 40 km/h.
At roughly a quarter narrower than comparable standard tractors, the M5101N is designed for working between narrow tree rows in orchards and vineyards, where standard tractors simply do not fit between the rows. The narrow track combined with high engine output of 77 kW demands particular attention to stability on slopes, as commonly found in vineyards, and the narrow tyres carry the same weight over a smaller footprint than on a standard tractor.
When buying a used narrow row-crop tractor of this type, it is worth checking the front axle bearings and steering geometry for play, since the narrow track places greater stress on the axle than on standard tractors. The often special, narrow tyres should be checked for even wear, as should the cab seals for rust, since vineyard tractors are frequently exposed to spray chemicals and moisture. The exterior mirrors and side panels are also worth a look for scuffing, a common sign of repeated contact with rows and trellis posts.
Sources: SpecCodex-Register: Kennwerte des Modells Kubota M5101N, Kubota (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 105 hp (77 kW)correct |
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,769 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,950 mmcorrect |
|---|---|
| Width | 1,250 mmcorrect |
| Height | 2,360 mm (with cab)correct |
| Wheelbase | 2,130 mmcorrect |
| Unladen weight | 2,650 kg (with cab)correct |
Drivetrain and chassis
| Forward gears | 36correct |
|---|---|
| Front tyres | 280/70R18correct |
| Rear tyres | 360/70R28correct |
| Top speed | 40 km/hcorrect |
Where this model stands
Power-to-weight ratio: 29.1 kW/t (77 kW / 2.6 t)
Power class: Large (100–180 hp)
Stronger than 69% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Kubota M5101N have?
The Kubota M5101N delivers 105 hp.
How much does the Kubota M5101N weigh?
The unladen weight is 2,650 kg.
What engine does the Kubota M5101N have?
4 cylinders, 3,769 cm³ displacement, Diesel.
How fast does the Kubota M5101N go?
Top speed is 40 km/h.
What are the dimensions of the Kubota M5101N?
3,950 mm × 1,250 mm × 2,360 mm.
When was the Kubota M5101N built?
Production years: 2017.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.