Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Kubota › M 8540 CAB

Kubota M 8540 CAB

Series: M ..40

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kubota M 8540 CAB is a model in the M ..40 series. The engine delivers 88 hp (65 kW), has 4 cylinders, with a displacement of 3,769 cm³. Rated speed is 2,600 rpm. The machine is 3,750 mm long, 1,980 mm wide and 2,560 mm high. The unladen weight is 2,751 kg. The wheelbase measures 2,250 mm. Ground clearance is 460 mm. Top speed is 40 km/h. The engine is water-cooled. Tyres: front 360/70R24, rear 480/70R34. The fuel is diesel. Rated output across the Kubota range ranges from 7.8 to 170.3 hp; the M 8540 CAB sits in the middle of that range with 88 hp. Its immediate neighbours are the M8200 below it with 86.5 hp and the M8560 above it with 91 hp. Rated output across the Kubota range ranges from 5.6 to 125.3 kW; here the M 8540 CAB sits in the middle of that range with 65 kW. 1112 Kubota models across 46 series are on record.

Kubota M8540 CAB (M ..40 series): four-cylinder diesel with 65 kW and an enclosed, weatherproof cab for year-round field work

The cab version of the M8540 belongs, like the open version, to Kubota's class of larger standard tractors, here supplemented by an enclosed operator station for year-round use in all weather.

Read on 3 more paragraphs

The M8540 CAB is powered by a water-cooled four-cylinder diesel engine of 3,769 cm³ displacement, delivering 65 kW, or 88 hp, at 2,600 rpm. At a kerb weight of 2,751 kg, the tractor is 3,750 mm long, 1,980 mm wide and 2,560 mm high, with a wheelbase of 2,250 mm. Its design top speed is 40 km/h.

At 40 km/h, the M8540 CAB reaches the upper limit of driving licence category L. The enclosed cab protects against weather, noise and dust, easing harvest work with heavy dust or winter service duties. In the power class around 65 kW lies the classic arable tractor for soil cultivation with medium-sized mounted implements and transport work with trailers.

When buying a used cab-equipped tractor of this size class, in addition to checking the clutch, gearbox and hydraulics, it is worth inspecting the cab seals at the doors and windscreen, since moisture ingress causes rust on the cab floor. Equally important are the rubber cab mounts, which transmit unabsorbed vibration to the operator station if cracked, and the operation of the wipers and cab heater, since a non-functioning heater in an enclosed cab is far more noticeable than on an open tractor.

Sources: SpecCodex-Register: Kennwerte des Modells Kubota M8540 CAB, Kubota (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power88 hp (65 kW)correct
Rated speed2,600 rpmcorrect
Cylinders4correct
Displacement3,769 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,750 mmcorrect
Width1,980 mmcorrect
Height2,560 mmcorrect
Wheelbase2,250 mmcorrect
Ground clearance460 mmcorrect
Unladen weight2,751 kgcorrect

Drivetrain and chassis

Front tyres360/70R24correct
Rear tyres480/70R34correct
Top speed40 km/hcorrect

Where this model stands

Power-to-weight ratio: 23.6 kW/t (65 kW / 2.8 t)

Power class: Universal (40–100 hp)

Stronger than 60% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kubota M 8540 CAB have?

The Kubota M 8540 CAB delivers 88 hp.

How much does the Kubota M 8540 CAB weigh?

The unladen weight is 2,751 kg.

What engine does the Kubota M 8540 CAB have?

4 cylinders, 3,769 cm³ displacement, Diesel.

How fast does the Kubota M 8540 CAB go?

Top speed is 40 km/h.

What are the dimensions of the Kubota M 8540 CAB?

3,750 mm × 1,980 mm × 2,560 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare